News for hackers. Stuff that matters.
Re:Soldering Wires – Here's a different way by JKCalhoun on Tuesday September 27, 2022 @06:59PM (#33002209)
Another pro tip, get a better soldering iron than the one in the video.

Soldering stations aren't cheap (Hakko is my somewhat-budget-friendly favorite) but that (plus good solder) will make you realize you've been able to solder all along: it's just that you were using crappy tools.

Re:Soldering Wires – Here's a different way by salmo on Tuesday September 27, 2022 @07:25PM (#33002430)
A few years back I bought a Chinese hot air rework station for <$200. Maybe like “Ayoye” or something with a lot of vowels. It has a soldering iron with a vacuum pump as well.

I never really use the hot air part but am in love with the iron. I can dial in the temp and avoid breathing fumes directly. It is so much nicer to use than my old Weller with a temp dial.

Re:Soldering Wires – Here's a different way by Ccecil on Tuesday September 27, 2022 @11:58PM (#33004085)
The Aoyue hotair station I have has a soldering iron which is a clone of a hakko 936. Uses the same tips even.

I almost exclusively use my Metcals now...the Aoyue has a tip for inserting heat set brass inserts to 3d prints nowadays, I don't use it to solder much.

Sidenote: My hotair station is almost 8 years old...still works fine. So for the money it was worth it for sure.

Re:Soldering Wires – Here's a different way by JKCalhoun on Tuesday September 27, 2022 @07:32PM (#33002500)
Yeah, I have been disappointed with Weller. Still, anything's probably better than the Radio Shack pencil iron I started out with (and thought I was bad at soldering).
Re:Soldering Wires – Here's a different way by salmo on Tuesday September 27, 2022 @07:45PM (#33002619)
Same. I still break out my Radio Shack desoldering iron from time to time, but only for things that can take the abuse.
Re:Soldering Wires – Here's a different way by spookthesunset on Wednesday September 28, 2022 @01:49AM (#33004643)
Literally, right? No wonder so many people think they suck at soldering! I know I did! Turns out it’s not me, it’s the tools!

Once I got a real iron, a real solder, and a real part holder my skills are infinitely better. I enjoy soldering now!

Re:Soldering Wires – Here's a different way by spookthesunset on Tuesday September 27, 2022 @08:54PM (#33003085)
Soldering is really one of those things that significantly improve with good tools.
Re:Soldering Wires – Here's a different way by fasthands9 on Tuesday September 27, 2022 @10:12PM (#33003518)
What's your tip for what makes one good?

I dont do a ton but for me it always seemed like the weak point was the grip was 3+ inches from the tip. If I am soldering something that is just a couple mm from the hole next to it then this requires a decemt amount of dexterity - even if things are held nicely.

Re:Soldering Wires – Here's a different way by JKCalhoun on Tuesday September 27, 2022 @11:30PM (#33003940)
The base with temperature control and a fine-ish tip is what makes them good, I think. The older Radio Shack pencil soldering irons had a fat tip, one temperature.

The nicer stations like Hakko's have very nice metallurgy in their tips as well.

As soon as you get a station too there's a little sponge, maybe some metal wool — these things you can use to clean the tip of the soldering iron. That in itself encourages good soldering hygiene and makes for better soldering.

Re:Soldering Wires – Here's a different way by fasthands9 on Wednesday September 28, 2022 @12:57AM (#33004389)
Thanks!

Yeah my kit came up a sponge and station too - but unmounted was so lightweight it was worthless. Perhaps a safety threat but I (with my amateur perspective) still think a shorter length would be very beneficial if possible.

Re:Soldering Wires – Here's a different way by briankelly on Wednesday September 28, 2022 @11:44AM (#33009306)
Look for an iron with a ceramic heating element as well - they come up to temperature much more quickly and it makes a big difference. I also recommend Hakko.