News for hackers. Stuff that matters.
Re:Soldering Wires – Here's a different way by mdturnerphys on Tuesday September 27, 2022 @04:58PM (#33001025)
Re:Soldering Wires – Here's a different way by rkagerer on Tuesday September 27, 2022 @09:02PM (#33003130)
Awesome. How do they know when to "stop"?

EDIT - found the answer:

> Because the metallic conductor is essentially a mirror at the wavelength of the laser, the process is effectively “self terminating”, that is the laser vaporises all of the insulating material down to the conductor and then stops, so no process control is required to prevent damage to the conductor.

Re:Soldering Wires – Here's a different way by linkdink on Tuesday September 27, 2022 @09:18PM (#33003228)
> The Mercury-4 is the culmination of years of research

I'm imagining some researcher after years of investment and experimentation eventually accidentally discovering the solution: "you mean it just shuts _itself_ off?!?!".

Re:Soldering Wires – Here's a different way by exmadscientist on Tuesday September 27, 2022 @09:30PM (#33003296)
It doesn't shut itself off. It just stops cutting. It's like using concrete as a kitchen cutting board: that knife isn't going to do any damage, regardless of whether or not you stop pushing.

If you want to laser through metals, you need a different type of laser. Just as getting through concrete needs a different tool (say, a hammer chisel).

Re:Soldering Wires – Here's a different way by linkdink on Wednesday September 28, 2022 @03:22PM (#33012072)
The line sounded funnier to me in the less pedantic way.
Re:Soldering Wires – Here's a different way by bombela on Wednesday September 28, 2022 @12:15AM (#33004188)
Not a really good comparison I think.

A knife blade and a masonry chisel are roughly the same type of carbon steel tempered to a similar hardness.

They will both scratch and damage concrete.

Re:Soldering Wires – Here's a different way by exmadscientist on Wednesday September 28, 2022 @02:12AM (#33004749)
I'll grant that it's an imperfect analogy!

But would you like to chop through my sidewalk to get to the water main with a santoku?

Re:Soldering Wires – Here's a different way by mdturnerphys on Tuesday September 27, 2022 @09:18PM (#33003229)
This and the wire is able to conduct the heat away faster than it is deposited into it. With some very thin phosphor bronze wires I have seen damage.
Re:Soldering Wires – Here's a different way by bbarnett on Tuesday September 27, 2022 @07:09PM (#33002302)
This... how, why, what? It has to be fake. Right?

We're supposed to be using lasers to ... well, shoot at space ships, not cut plastic wire wrapping!!

Re:Soldering Wires – Here's a different way by techdragon on Wednesday September 28, 2022 @12:08AM (#33004154)
When all you have is a laser, every problem looks like something to be ablated.
Re:Soldering Wires – Here's a different way by mechanical_bear on Tuesday September 27, 2022 @08:43PM (#33003010)
That has to be expensive.
Re:Soldering Wires – Here's a different way by lagrange77 on Wednesday September 28, 2022 @05:11AM (#33005963)