Re:Audio Optocouplers
by mindslight on Sunday September 25, 2022 @01:44PM
(#32973864)
Good point about needing to plan for both halves of the wave. That's especially true for my capacitor suggestion. Last time I designed something (trickle supply) with line rated capacitors, the DC component was a zener which has that built in.
My line capacitor suggestion was really just to get one started thinking about an actual circuit design for longer term. A 1/4 W resistor in serious with line voltage works fine on the test bench, but for longer term non-attended usage I would think about the various ways things could go wrong. And if you're going to spec a special resistor, then you might as well spec a special capacitor instead.
If I had to guess about why the LED wasn't destroyed, it's because the reverse breakdown voltage is low enough that significant heat does not build up in the LED. A reverse avalanche isn't necessarily destructive.
OTOH I'm wondering how you didn't break the LED during the reverse cycles of the AC wave, if you didn't use either a high-voltage diode in sequence or some random diode or second LED in reverse direction in parallel to the first one to bypass the other half of the wave.