Re:3D print and build a 164mm f/2.5 lens for less than $15
by rglullis on Thursday August 25, 2022 @05:15AM
(#32591391)
Matt from DIYPerks has recently built a f0.4 lens on an estimated total cost of $190: https://www.youtube.com/watch?v=9cT0jXI7l4E
[ Parent
| on HN ]
Re:3D print and build a 164mm f/2.5 lens for less than $15
by nicoburns on Thursday August 25, 2022 @06:02AM
(#32591650)
Impressive as that project is, for the most part they bought that lens rather than building it.
Re:3D print and build a 164mm f/2.5 lens for less than $15
by lesuorac on Thursday August 25, 2022 @09:32AM
(#32593477)
Not my area of expertise but you might be able to CNC the lens.
(Part 2: Goes into math) https://www.youtube.com/watch?v=ADtw6cxEK28
(Part 1: Shows CNCing / usage) https://www.youtube.com/watch?v=ZW2lj0KjyT8
Re:3D print and build a 164mm f/2.5 lens for less than $15
by digdugdirk on Thursday August 25, 2022 @04:43PM
(#32599701)
Super cool project, and they did a really great job documenting the process.
That said, a hobbyist level CNC will not be able to make a functional lens. Tolerances are way too high. Maybe it'll be good enough for focusing light and burning holes in paper, but it's not going to be remotely close to photography level.
Re:3D print and build a 164mm f/2.5 lens for less than $15
by rglullis on Thursday August 25, 2022 @06:09AM
(#32591699)
So is this one here, no? Both projects seem to assume that the glass itself is a given.