Re:I spent a year designing a low profile, minimal mechanica...
by Lendal on Thursday August 18, 2022 @08:25AM
(#32508616)
There's a lot of wasted space on the right side of this keyboard where they could have easily put the Del/PgUp/PgDn keys right there. I don't know why they didn't.
[ Parent
| on HN ]
Re:I spent a year designing a low profile, minimal mechanica...
by 45ure on Thursday August 18, 2022 @09:03AM
(#32509029)
Judging from the USB-C at the top and other tact/slide switches on the side, my guess is that the MCU and a prismatic battery of sorts (500mAh Li-ion?) occupies that space. A low profile design will always have some tradeoffs; perhaps an oled in that space is possible with a cutout for a badge.
Re:I spent a year designing a low profile, minimal mechanica...
by layer8 on Thursday August 18, 2022 @08:34AM
(#32508715)
I suspect they need that space to house the internal electronics like the keyboard controller.
Re:I spent a year designing a low profile, minimal mechanica...
by jagger27 on Thursday August 18, 2022 @09:10AM
(#32509100)
Controllers are really small these days and fit just fine in the gaps between keys (see link below for a typical example). It’s almost certainly mostly for the battery.
https://rama.works/updates/2020/4/24/m50-a-pcb-inventory-2-b...
Re:I spent a year designing a low profile, minimal mechanica...
by aemerson_ on Thursday August 18, 2022 @09:39AM
(#32509413)
You are correct! There was not enough space below the keys due to the device's low profile. So the right hand area houses the MCU, USB C port, battery, as well as the 2 slide switches and button that poke out the side of the case.