Re:Tell HN: Apple products come with ungrounded plug in India
by Dardania on Saturday August 13, 2022 @07:06PM
(#32454635)
Maybe the Mac is the straw that breaks the camels back.
You might have other leakages elsewhere (water heating is always a good one) that just fall below the threshold…and the Mac tips it over the GFCI?
Way to check would be to disconnect / isolate earthing downstream of GFCI and try with Mac then..
also to measure the GFCI leakage current (electricians usually have the instrumentation to do so)
- It only happens with the Mac Studio, I've never seen another device do this.
- It happens whether I use the original supplied cable or not
- A 30mA GFCI doesn't take much to trip, so I can imagine a little arc flash from the phase pins can create enough plasma sputter to then arc to ground
- It's certainly a ground fault as it only happens on GFCI protected circuits
- It's not a fault in my electrical installation, that has been checked recently now.
- It can be reproduced if plugged into any GFCI protected circuit, at home, in the office, a friends house
Some random ideas of mine:
- Perhaps Apple haven't adhered to the specs around the "gigantic clearances"
- The pins on the socket-side have this same matt-like finish the rest of the Aluminium body does, perhaps this has something to do with it.