Re:Hitachi Wood Plug Cutter Works Perfectly in Hand Held Dri...
by jmuhlich on Sunday July 31, 2022 @02:05PM
(#32297328)
I’ve used those Snappy brand cutters in a handheld cordless drill. It’s workable but tricky. You need to start with light pressure and high speed until the cutters score a clean circle, then gradually increase the pressure. The workpiece absolutely needs to be clamped down with zero movement, and it helps if you can find a way to brace your upper body and the drill as you work. The trickiest part is keeping the cutter perfectly square to the work in both axes —- if you tip it too far you’re likely to shatter the cutter as the metal is very brittle.
Re:Hitachi Wood Plug Cutter Works Perfectly in Hand Held Dri...
by kevin_thibedeau on Sunday July 31, 2022 @04:37PM
(#32298604)
I've hand drilled hundreds with a non centering plug cutter. It works fine. You make the plugs long anyway so tear out at the beginning isn't an issue. With a tapered cutter the starting surface is going into the hole so it doesn't have to look good either. The main tedium is when they get dull it becomes a bear to force them into the wood.
Re:Hitachi Wood Plug Cutter Works Perfectly in Hand Held Dri...
by ricardobeat on Sunday July 31, 2022 @09:29AM
(#32295358)
The comments in the post say it’s been discontinued,
but I was able to find similar bits by other brands, searching for “self-centering plug cutter”.
https://www.lowes.com/pd/Hitachi-3-8-in-Plug-Cutter/3056069 (discontinued)
None of these match (have the 4 cutting teeth and the center), they either have two teeth with the center or 4 teeth without.
https://www.woodcraft.com/categories/plug-cutters
Wonder how these other ones hold up to hand drilling.