Re:NiteFury – An Artix-7 FPGA with its own DDR3 RAM right in...
by Teknoman117 on Friday July 22, 2022 @05:00PM
(#32197047)
A bit of a nitpick - LiteX still mostly needs Vivado installed for now for 7 series FPGAs. There's a project that's very far along in reverse engineering the Xilinx bitstream (https://github.com/f4pga/prjxray), but it's still missing many features (PCIe, SERDES, hardware multipliers, etc.). You can run on the open source toolchain but you lose so many of the reasons to actually use a Xilinx FPGA.
The only fully supported reverse engineered FPGAs at the moment are the Lattice ECP5(-5G), iCE40, and QuickLogic EOS families.
Re:NiteFury – An Artix-7 FPGA with its own DDR3 RAM right in...
by mithro on Friday July 22, 2022 @06:55PM
(#32198094)
When did you last check? The Yosys+VPR toolchain currently supports a full Linux capable SoC with Ethernet and DDR memory on the Arty A35T (which has a Xilinx Artix 7 part), see the example at https://f4pga-examples.readthedocs.io/en/latest/building-exa...
Re:NiteFury – An Artix-7 FPGA with its own DDR3 RAM right in...
by Teknoman117 on Friday July 22, 2022 @07:27PM
(#32198349)
A few months ago. Looks like DSP (hardware multiply-accumulate units) is partially supported now if VexRiscv is synthesizing, but there's still some open issues on their tracker about whether they understand them fully or not.
Re:NiteFury – An Artix-7 FPGA with its own DDR3 RAM right in...
by mithro on Friday July 22, 2022 @08:28PM
(#32198865)
I afraid I don't recall the status of DSP blocks in the open source toolchains for Xilinx hardware. Even if the basics are supported I'm sure there are plenty of DSP features that are not.
Many configurations of VexRISCV work fine without using the DSP blocks (and has been working for 2+ years), so not sure that is relevant.
Re:NiteFury – An Artix-7 FPGA with its own DDR3 RAM right in...
by arcticbull on Friday July 22, 2022 @07:16AM
(#32190726)
You can also grab an Arty from Digilent. [1]
[1] https://digilent.com/shop/arty-a7-artix-7-fpga-development-b...
Artix-7 is supported by LiteX, an open-source toolchain based on reverse engineering of Xilinx bitstream, https://github.com/enjoy-digital/litex & https://antmicro.com/blog/2020/05/multicore-vex-in-litex/
These can be used for PCILeech DMA attacks/testing, http://blog.frizk.net/2021/10/acorn.html