News for hackers. Stuff that matters.
Re:What a gas stove ban means for restaurants by cmclaughlin on Friday June 03, 2022 @10:40PM (#31616429)
Cracking the glass of a induction cooktop is still a problem. So I recommend carbon steel over cast iron for this purpose. They’re similar in that they both need to be seasoned. But carbon steel is much lighter and it’s smooth unlike most modern cast iron cookware.
Re:What a gas stove ban means for restaurants by dekhn on Sunday June 05, 2022 @12:38PM (#31632537)
Well, I'm attached to my cast iron (pan, griddle, casserole and more), and treating my cooking top roughly (I used to be a cook in a restaurant, there we used carbon steel, which is fine, but sort of a different beast, from cast iron) is just how I roll. So I guess induction is still off the table. Even resistive electric coils don't really handle things quite as well as a gas range with metal grates.
Re:What a gas stove ban means for restaurants by petre on Saturday June 04, 2022 @01:12AM (#31617214)
Carbon steel deforms over heat. Also leaks oil through the pores. Or maybe I should have bought a more expensive pancake pan? Otherwise I like it; using both but I am extra careful with the cast iron.
Re:What a gas stove ban means for restaurants by cmclaughlin on Saturday June 04, 2022 @02:38AM (#31617660)
Yes thin carbon steel cookware warps. My wok is a good example of that. But there plenty of high quality thick carbon steel cookware on the market that’s stronger.

What do you mean it leaks oil? I’ve never noticed any like that.

Re:What a gas stove ban means for restaurants by petre on Saturday June 04, 2022 @04:26AM (#31618162)
I always find oil on the induction cooker glass, under the pan. So I assume it leaks through pores when the oil gets hot and fluid? It's an ok quality pancake pan.

https://www.amazon.com/Kitchencraft-Non-stick-Crepe-Master-C...

(the reviewers that claim it sticks have not heated it up properly and the peeled off "teflon" is just burned crêpe)

Re:What a gas stove ban means for restaurants by morberg on Sunday June 05, 2022 @03:03AM (#31628708)
Carbon steel should not have any non-stick coating applied from factory. Using a pure carbon steel pan will create a slick surface. Look at e.g. DeBuyer for a good brand.

In your case I think that oil gets over the lip and around the pan.