Re:2022 Mac Studio (20-core M1 Ultra) Review
by my123 on Thursday April 28, 2022 @08:20PM
(#31199868)
> You can always emulate FP64
That's what's done by Intel for their newer consumer GPUs AFAIK, zero FP64 units present on die, but an emulation mode can be enabled to expose that support. (which is then done by software on the GPU)
> it is around 25%
50%, ~ 200GB/sec on an M1 Max out of ~ 400GB/sec
The M1 architecture only allows the CPU to access a fraction of the memory bus, it is around 25% of the total bandwidth or so iirc. The rest has to go to the GPU or NPU or one of the other units, so even if your FP64 code was super shitty emulated with no hardware support, on paper you should be able to quadruple performance by utilizing it.
If you can "pre-digest" it at all, and then push it back from the GPU to the CPU, that might be another viable approach.
Of course none of this will exist out of the box in some 90s FORTRAN code!