Re:You’re muted – or are you? Videoconferencing apps may lis...
by Nextgrid on Wednesday April 13, 2022 @04:46PM
(#31020031)
On my T480s the mic mute button is handled in hardware/low-level firmware however all it does is set the mic input level to 0%, where the OS can trivially set it back to 100% if it wants.
At least the LED on the button is driven by firmware based on that level, so it lights up only when the mic level is actually at 0%. While it won't prevent the OS from raising the volume, at least you'll know about it as the mute light will go off.
Re:You’re muted – or are you? Videoconferencing apps may lis...
by SllX on Wednesday April 13, 2022 @01:54PM
(#31017876)
Check out if you can disable the mic in Audio MIDI Setup on Mac OS X. I tend to use the built in webcam so I’ve never looked on an external one, but in theory you should be able to selectively disable the input/output of any device via its interface. I do this to disable the mic on Work equipment and use my own AirPods as the mic input.
Re:You’re muted – or are you? Videoconferencing apps may lis...
by remram on Wednesday April 13, 2022 @01:51PM
(#31017832)
Yes those mute lights have been stuck on "lit" (= "mute") on my Windows forever, both the mic and speaker lights. However recording and playback work fine, the lights just stay on. Very annoying, a little unsettling.
My daily driver is Ubuntu where both lights work fine, on the same machine (dual boot). But now I know not to trust them.
Lenovo ThinkPad P51
A solution that actually (logically if not physically) deactivates any built-in microphone would arguably be at least as important as a "webcam shield".
Apple does this for the built-in microphone for their newer laptops, but that benefit is immediately negated when e.g. connecting a USB webcam that also contains a microphone.