Most user-facing connectors have a metal shield around them connected to frame ground. The idea is that any ESD shock goes safely through this first instead of to a sensitive data line.
Connection-sequencing ensures that the ground and power is connected before data lines are. If you look inside a cable-side USB connector, you'll see that the inner two wires (data) are recessed a little so that the power connectors go first. A device that is connected without power can (through its ESD protection circuit) attempt to draw power from data lines... this can cause damage because most data lines can't supply the current to power the entire device.
Every USB device connected to your PC right now probably has a little ESD protection IC in it. Usually sitting right next to the USB connector (as close as possible).
And since the snap-in boards are all rigid you don't really need to worry about the possibility that contact will be made in like.. a rolling way. Either the pins are on the board or they're not.
But I'm not an EE, just a hobbyist, so maybe there's something I've missed there and what I'm thinking is way more complicated than I think.
So likely they won't have nearly the cycle life of USB-C but do they really need to?
> Merveilles seems aligned with the ideals of Solarpunk while internally expecting the world of Cyberpunk, it is neither a utopian or dystopian vision, but a way of straddling both contingencies.
Two things stick out for critique to me -
> Merveilles seems aligned with the ideals of Solarpunk while internally expecting the world of Cyberpunk, it is neither a utopian or dystopian vision, but a way of straddling both contingencies.
I get this, and in a way, I think it’s how I’m operating already, but man, it’s an art movement - don’t give the dystopia space in the room, it’s already got plenty everywhere else.
> The Merveilles visual aesthetic restricts color palettes to black and white, vector or pixel art, with at most a single accent color (usually a sea-foam aqua). Industrial design is minimalist, geometric black-forged metals, natural wood.
My visual aesthetic these days is “all of the above.” For the love of god, colors exist - trillions of them! Take two! Hell, take three or four! They’re cheap! And shapes - my god, man, the shapes you can make! You ever see the temple carvings in Nepal? So many shapes! Take a walk through a forest, and just look at all the shapes! Look at trees, man - the opposite of simple!
(this was intended as a gentle ribbing, not actual criticism. I found the contrast between exclusion and inclusion interesting :)
https://www.fsf.org/news/artist-collective-hundred-rabbits-t...
Google tried this in 2015. It was called Project Ara.[1] A similar click-together system, with the same problems. Plus the problem that there's no good reason to make a phone that way. Google acquired that from Phonebloks and killed it.[2]
It's not a bad idea if you solve the mechanical problems and have the components produced in sufficient quantity to be very cheap. A little bigger, a lot more rugged, with a good wire management solution, and you'd have something useful.
[1] https://www.cnet.com/tech/mobile/project-ara-everything-we-k...
It is briefly explained at 4:04 that the initial 4 mins it's running on a 3300 battery, and then he swaps it to USB charging.
However, the most complex and costly part is the PCB and circuit design. The PCBs used in the blocks are absolutely awesome.
Thanks to 3D printers that are cheap, the casing and other plastic materials are easy to make.
All that being said, this has very low chance of becoming a real world product. Real world is messy, dirty, wet and an absolutely shitty place for snap on electronics.
What would work, is better connector technology. It is obvious that even with all this simplification, this will still be a hobbyist product, rather than a serious mass market product.