News for hackers. Stuff that matters.
Re:Reverse-engineering the waveform generator in a 1969 brea... by kens on Wednesday March 09, 2022 @01:23PM (#30618136)
Author here for all your questions about obsolete oscillator circuitry :-)
Re:Reverse-engineering the waveform generator in a 1969 brea... by adrian_b on Wednesday March 09, 2022 @02:06PM (#30618669)
Even if I do not have any question, because I happen to be familiar with this kind of circuits, I just want to thank you for your work resulting in one more interesting article.

I suppose that there must be many like me, who normally would not feel the need to comment your articles, but who nonetheless enjoy very much reading them.

A long time ago, when I was young, I have worked with many devices and circuits similar to those reverse-engineered by you in this series of articles. Unfortunately at that time it was tedious and expensive to make photographic records of such technologies and such work, so now I am sad that I do not have records and the memories fade away.

Your articles fill this void and I am grateful for them.

Re:Reverse-engineering the waveform generator in a 1969 brea... by AdamH12113 on Wednesday March 09, 2022 @01:51PM (#30618505)
Nice write-up! Question about the (excellent) schematic PDF -- in the pulse trigger section, the emitter of Q3 seems to be tied to the top of R14, but I don't think that can be right? Is it supposed to be connected to ground?
Re:Reverse-engineering the waveform generator in a 1969 brea... by kens on Wednesday March 09, 2022 @02:54PM (#30619193)
You should expect about 90% accuracy from the schematic :-) I didn't check the transistor part numbers, so I kind of guessed at NPN vs PNP. Most likely it's a PNP transistor. But the pinout could also be wrong.
Re:Reverse-engineering the waveform generator in a 1969 brea... by myself248 on Wednesday March 09, 2022 @11:49PM (#30623339)
That sine wave shaping network is blowing my mind! I've always wondered how function generators do that, and I knew filtering would only work at one frequency.

The diode-resistor network is all sorts of elegant. Using twelve resistors of carefully chosen values though, tolerance issues must be tricky. I'd imagine laser-trimmed networks being a good fit for that topology.

Is that likely used in monolithic function generator chips like the XR2206?

Re:Reverse-engineering the waveform generator in a 1969 brea... by kens on Thursday March 10, 2022 @12:01AM (#30623391)
I looked at the XR2206 datasheet. It has a "sine shaper", but from the schematic it isn't a resistor-diode network. It's not immediately obvious to me how that sine shaper works.

https://www.sparkfun.com/datasheets/Kits/XR2206_104_020808.p...

Re:Reverse-engineering the waveform generator in a 1969 brea... by tgflynn on Wednesday March 09, 2022 @04:33PM (#30620294)
I'm curious how you were able to source the parts to replace the burned out transistors and other components.
Re:Reverse-engineering the waveform generator in a 1969 brea... by kens on Wednesday March 09, 2022 @06:45PM (#30621487)
CuriousMarc has lots of old transistors, so he found some that worked as replacements.