Sometimes you can but other times it isn't feasible because the mass of the brick in that configuration isn't pushing against the wall and is instead actively pulling the plugs out of the receptacle.

Why does the orientation matter if the end result is the same? My point is your suggestion is no better than OPs, so who cares which way the brick points?

> Why does the orientation matter

So it doesn't cover the bottom port with it's mass.

> if the end result is the same?

It is not; the difference is, that you could connect another brick to the bottom port.

If the brick's plug is polarized it matters.

Though if it is polarized, it should be three-prong one, to physically prevent connecting it the other way.

But as Germans and their Schuko have shown, it doesn't really matter ;)

US polarized plugs have the neutral pin physically bigger than the line pin. They don't need the third prong to make it one-way, that's only needed for conductive-cased items to have a ground connection.

Nope, the neutral prong is wider on polarized plugs. Nearly all two-prong plugs are polarized, it's just stuff like transformers or soldering irons that aren't.