Back in university I had an experience that was really instructive.

For a project we had to write a program that differentiates mathematical equations.

I dove in and just started writing code. Eventually, I realized that I had made a design error and that my code was much more complicated and cumbersome than it needed to be and I was getting stuck due to the complexity of the monstrosity I created.

Unfortunately I figured this fundamental design flaw the night before we had to hand the assignment in and there was no way I could rewrite everything from scratch. I had to push through and put lipstick on this pig as best I could.

In the end, I had spent way more time working on this project than my friends who had spent time upfront designing their programs instead of just jumping in.

This has taught me the lesson to always first try and think things through and come up with some kind of initial design, instead of just jumping in and writing code blindly. Yes you can always refactor, but some early design mistakes can cost you a lot of time, and perhaps make refactoring unfeasible compared to a complete rewrite.

As they say "measure twice, cut once".

Yeah this just hasn't been my experience. If you're working on a house you measure twice and cut once because the cost of reworking physical materials is a lot more expensive than the cost of doing a second measurement.

If you could delete half your house and re-build it at zero cost, it might be more valuable to just go for the first attempt and learn from it rather than trying to do everything in theory up front.

If you find yourself working on a "monstrosity" maybe you haven't seen the signs soon enough that you need to take a step back and refactor. But in my experience, at least starting on the problem with a POC gives you so much more high quality information that even if you have to scrap and re-write part way in, you're going to reach such a better result than if you try to map the whole thing out first without actually having tried to solve the problem.

I’ve found people often overlook that while code can be very quickly deleted, gigabytes or terabytes of production data is a huge pain to ETL later. Investing in the data model upfront has huge payoffs for your code and avoiding ETLs later on.

When can you rebuild at zero cost?

I have made similar avoidable mistakes of not thinking it through enough, could have saved me a lot of rewriting, which was pretty expensive

Rewriting is incredibly cheap! And you learn a lot from the failed attempts.

Again to the house analogy, if you could just build 3 vestibules to see how they fit with just a little typing, that would be far and away preferable to committing to everything on paper before hand.

No, it is not cheap, generally.

Example:

Dendrite[0] was going to be a Rewrite of Synapse (which was a prototype which ended up going into production). The rewrite started more than 5 years ago, had lots of development breaks and it still is nowhere complete or close to replace a existing Synapse instance (which even today is ... Well ... suboptimal software).

The current plans are to support and use both servers long term, because Synapse is already too widespread.

I wouldn't call that cheap.

[0]: https://github.com/matrix-org/dendrite

Well starting from scratch for a rewrite is generally a bad idea. I'm more a fan of incremental re-wrties. But I have code bases I have been working on for years with tens of thousands of lines where basically the entire thing gets rewritten ever 18 months or so, a bit at a time.

Isn't your example proof of the benefit of pragmatic coding? Synapse is actually serving users right now. Dendrite sounds like a "better design" which is stuck in purgatory.

They tried an incremental rewrite before. They failed, and started Dendrite.

https://matrix.org/blog/2020/10/08/dendrite-is-entering-beta

Survivor bias.

You don't see all the perfectly designed codebases that never went anywhere.

We only talk about legacy code because it's the one that pays the bills.

Are you the only working on the codebase? It may be easy to rewrite your own codebase, but it's certainly not easy to rewrite someone else's. Especially if they haven't been caring about code quality and/or test coverage.

My definition of "good-quality" code is pretty much exactly "how difficult would this codebase be for a new engineer to understand and modify safely."

You can go really really fast when you don’t give a shit about consequences.

Often the worst code comes from prolific people. There’s just so much if it. And if you touch it you will break it at least 1% of the time, so you have to pick your battles when you are trying to keep the ratio under control.

If you write loosely-coupled code, it shouldn't be that easy to break things unless you're careless.

Nobody in this whole post is talking about loosely coupled code. If you find someone complaining about how hard it is to modify loosely coupled code, you have my permission to fire them.

For everyone else this is tautological. Good code can continue to be good code.

If it were loosely coupled it wouldn’t be an anecdote in this conversation. There is no “I”, there is no “you”. There is only “us”. I can only control Us so much, and I don’t have a time machine.

People who only have green field projects as their context are very frustrating in conversations like this. They make suggestions like, well, don’t fuck up in the first place. I don’t know what your history is but that’s the feeling I’m getting.

Not that it matters but I've worked on a mix of green-field projects and mature codebases in various domains with teams of various sizes over more than a decade of professional experience.

I could assume you're throwing shade on "prolific programmers" out of some sense of insecurity, but it wouldn't be fair to generalize about strangers on the internet ;)

No, It’s an overdeveloped sense of justice.

I just punch up at condescending people. Every discipline has a bunch of armchair people who don’t understand the problem who think “get more exercise” is the response to depressed people or people with chronic fatigue, “eat fewer calories” is the answer to weight issues or diabetes, or “write it right the first time” is a useful response to people trying to solve real world problems.

Kindly let the grownups talk and keep your flash card answers to yourself.

> Kindly let the grownups talk

Well one of us is certainly being condescending ;)

And did you really answer twice to the same comment? My goodness I must have really struck a nerve.

Well this escalated quickly

If everyone is discussing a problem that you don’t see, then why offer your simple solution except to appear smart? And who needs to appear smart? That’s your insecurity. Not mine.

Idk maybe it's because I did freelancing for quite some time and was often hired to clean up somebody's mess, but I think it's not so bad to rewrite someone else's code. What I normally do is quarantine the old code behind a clean interface, or else start fresh with a better code structure, and then copy and paste the good bits of business logic from the old project into the new one.

Code has a lot of really great properties which make it easy to modify in provably safe ways if you know what you're doing.

That really depends on what you're working on and to what degree it's coupled to the system it's a part of. A form on a web application, or an API endpoint? Sure, rewriting it is probably trivial. A new process scheduler for Linux? The caching system in an HTTP server? Maybe writing the code will be easy (though probably not), but building any confidence that it doesn't break something that's unexpectedly load bearing will be anything but cheap. And if what you're rewriting that started out as "just code and see what happens" it's going to be more expensive still.

Which isn't to say that rewriting can't be cheap, but some intentional design (or at least diligent maintenance and refactoring) must have gone into the system to support that style of development. At which point you're back to targeting "quality," even if it's no longer a focus of on the smaller scale.

How are defining cheep, and how big is the metaphorical house? Developer time is not free (unless you are working a personal project) and if an hour or two up front of planning things out stops you from making a lynch pin mistake that needs to be re-written it is better to do the planning.

If the amount of time that it takes to rewrite something is trivial (a week or less) then you aren't working on something all that big/complicated.

Probably not literally without cost, but if the code was written with disposability in mind combined with just a little bit of pre-planning, then rewriting or refactoring should be indeed trivial.

When start off with "wrong" higher level design concepts, neither of those is trivial.

If you're writing a function implementation without thinking about design, well you might be right.

I sometimes wonder if there is a miscommunication. I’m scratching my head sometimes like “how can rewriting/refactoring an entire 10-20k project take negligible time?”

Maybe some people have very small projects compared to what I work on? Or maybe they are talking about the design of a single small component?

I inherited a codebase that needed some refactoring because it was written “to just get it shipped”. If completely fell apart with more users and has taken me a year to get it where it needs to be.

But how often would you actually have to rewrite an entire 10-20k LOC project at once?

As you need to add functionality, you can opportunistically find ways to improve the codebase toward a better/more maintainable structure.

I have several large codebases I work on which probably get totally rewritten every 18 months or 2 years, however incrementally.

If you have a working project and you think you need to throw it all out and start from scratch probably it's worth a second thought.

We always talk about time when the elephant in the room is energy. People say we don’t have “time” for that and someone else gets out a calendar and tries to disprove them. Followed by a bunch of backpedaling with other excuses and followed up with foot dragging.

The second elephant in the room is job security. People who write baroque code are hard to fire. Nobody wants to invest energy in understanding their private little Bedlam.

When starting, yes it's easy to replace code, even with a shitty design. If it had to take more than ten hundred thousands lines of code to realize that the design is wrong, then it means the author lacks enough awareness or foresight to plan ahead, and no amount of planning will fix that. Code should be replaced/rewritten if the earliest signs faulty design show up, which should be trivial if the code was and remains "disposable".

Not having to pay for physical materials doesn’t mean there are no costs. Throwing hours, days, or weeks of focused work time out the window does not sound cost free to me or Whoever signs paychecks.

It's not throwing it out the window if it's an iteration toward a better solution. There's a reason nobody does waterfall anymore in software - up-front planning is less productive than rapid prototyping in most cases.

The development of the relational model of databases is an example where thinking things through led to a radically different and superior solution, going in a very different direction than ad-hoc development had produced, or was ever likely to produce. At the time Codd published his seminal paper, there were no implementations of those ideas.

It is also notoriously difficult to get the design of concurrency primitives correct without thinking things through.

Yeah, but >99% code is about using relational DBs and concurrency primitives not developing them. There are somethings that would depend on solid theoretical understanding but most of the software today is much more amenable to trying out things first and reworking failed parts.

In practice, one does not write a single line of code without feeling that it is somehow getting you closer to the desired outcome. If you have the ability to anticipate that it will not contribute to that goal, or that it will create problems on the way, or that there is a better way, even before you have written and tested it, then it would be counterproductive not to do so.

But there's also such a thing as over-planning. If every function you write, you are thinking about 100 different rules about "best practices" you can end up not writing anything at all. Sometimes it's better to accept some level of imperfection first and refine later.

Sure, but your reply to Jcbrand was dismissive of the idea that there is any value to thinking ahead. Jcbrand was not advocating 'thinking about 100 different rules about "best practices"', only that it is useful to try to work out the consequences of the choices you make, in advance of those consequences being revealed to you by failed tests (or failures in use.)

I have no idea why there is a large (or at least vocal) community of developers whose dogma seems to be that thinking things through is a waste of time (though maybe it is just an overreaction to the equally dogmatic clean coders and similar prescriptivists.)

I mean it's always a bit of a middle ground isn't it? I'm not suggesting that you should literally just sit down at a keyboard and blindly start typing - of course you want to have at least some concept of how you want to approach the problem.

My point is more that coding itself is an excellent tool for probing for solutions. In many cases I think "software design" is over valued, and time spent prototyping is often more valuable than time spent thinking though the problem if you want to arrive at a high quality answer.

As someone who is currently over a year into rewriting a massive system with a fundamental design error by the original designer I can assure you that failing to plan your data model up front can have huge costs not just for you but for anyone who picks up your code in the future, and can hamstring a system so that it is impossible to extend or evolve.

What was the design error?

It's a platform for managing a kind of appointment, but it doesn't have an appointments table. The appointments data is combined with a different table, and there was no way to disentangle them easily because the entire system was built around that object model. Case study in failure to normalize.

The hard part is done, but basically we had to switch the engine while the car was running so to speak. In order to switch this out you need to start writing the correct data shape, then switch everything over to reading that shape. When people work strict 9 to 5s this will take you forever especially when managing a large amount of volume, which requires you to be extremely risk-averse and slow.

I don't know about your experience but refactoring is just not on the menu in most commercial environments I'm familiar with, therefore if you always pick the first solution that cones to find, it is likely you have to leave with the consequences of the hack for a long time (until the system crumbles under its own complexity).

I guess I have been lucky - I've always been able to negotiate for time to refactor if needed, or just find time for it in lulls between tasks. If you're in an environment where engineers don't have the freedom to improve their codebase I would not consider that to be a healthy practice, but that certainly would change the value proposition around upfront design.

I refactor all the time and have done it for 25+ years. The result is solid code that is easy to maintain and close to bug free (no bugs in production the last 5+ years).

Could you describe the process: did you need to justify the time spent on refactoring in any way? ("why known bugs, requested new features should wait until the refactoring is done"--I'm playing devils advocate here. I'm interested, how you justified it before the management if you had one)

I never asked permission to do it. I consider refactoring to be part of my job. Small refactorings I do right away when implementing a new feature. Large ones I split into many small steps and work on for months in-between working on new features. Never underestimate the power of making a small improvement every day. I make sure that the long term refactorings never breaks the system or introduce new bugs. I have solid tests in place making sure changes doesn’t change behaviour.

This is a very self-centered way to think about things. I don’t mean selfish, I mean thinking as a “me” problem instead of an “us” problem.

If I have to rewrite a bit of my code then them’s the breaks. But I work on a team, sometimes a big team. I don’t have “a house” I have a construction crew that is building many houses and will go on building them. If they’re doing it wrong then I have not only the problem in front of me but five copies elsewhere. And I can’t fix problems N times faster than they are made. And I can’t always sell them on the better technique, even when there are demonstrable problems with theirs.

I want to work with people who I trust to rewrite my code.

And of course I don't mean that you should check in code which is a mess. But from the time you start a feature to the time you open a PR, you can go through several iterations of messy code before arriving at a solution which is fit to share with your colleagues.

I do too, but I can’t spend my whole life interviewing, and sometimes great teams just run out of money.

Usually you can't delete half your codebase and re-build it at zero cost. The cost of developing a codebase is often the primary cost for software companies.

The cost of the knowledge of that code and the techniques that created is spread in five to fifty other brains. That’s the hard part. You keep finding new copies of patterns you’re trying to remove.

In a couple of notable cases, that didn’t stop until I removed the last copy. My theory is that certain people were cutting and pasting code from one of the three surviving copies.

> "If you could delete half your house and re-build it at zero cost, it might..."

I look forward to that day when atoms are commanded like bits!

Weeks of programming can save you hours of planning!

You can also spend weeks trying to solve a problem on paper which can be solved with hours of experimentation

I think this is the kind of thing you learn at uni and then potentially unlearn later on. Over the years I became better at using code to explore problem spaces and as a design tool. Nowadays I feel that incremental design delivers better results in less time than upfront design.

I think your incremental design delivers better results because you already know or at least have a hunch of what wouldn't work and avoid that. You have an abstract architecture when starting and change accordingly on the fly, while programming, using your own best practices.

Top down and bottom up architecture have their places. Being extreme in favor of one side is usually bad, as almost anything in life.

I'm just having trouble understanding what you're talking about. Like what would be a concrete example of how a poor up-front design decision would paint you into an unrecoverable corner?

My experience says that you might not need much design for a typical CRUD app, but try to write a JVM/compiler/database and you will quickly see that a bad design pretty much aborts the given project and you have to start from almost scratch.

There is no incrementel rewrite between different stack/heap handling as those are an absolutely central parts of the design, which are pretty much impossible to try to encapsulate, as opposed to the 34th API endpoint. So what it means is that certain domains have much higher essential complexity and at that point the average encapsulation given by OOP/language tools are not sufficient to contain these parts, complexity will triumph and the whole program has to be viewed as one unified whole. Concurrent applications are a similar can of worms.

All the technologies you mentioned do undergo large component rewrites and refactoring very often. It's true that e.g. the JVM is sometimes hemmed in by decisions from the past. But it is a decades old project and it is not clear that more up front design and deliberation would have future proofed the project for the language and VM conventions of the 2020s.

I have applied incremental design to concurrent applications and a compiler + stack VM project that runs in embedded environments. You don't go in blind. You do need domain experience and broad strokes knowledge of the conventions. You make some major architectural decisions up front but these don't involve much planning or design. Contrary to your point about CRUD apps, API design is harder to achieve incrementally since it is an interface and requires cross-team (sometimes cross-organizational) iteration. It's still possible, but your organization needs to be equipped for incremental/agile work.

Yeah I mean for sure it depends on the domain.

But it's interesting you mentioned compilers - I'm in the process of writing one, and I very much used an incremental approach.

The first pass I essentially wrote a parser and a component which walked the AST and produced output. At a certain point it was clear that local knowledge of the AST wasn't sufficient to capture non-local details about the program which were required to produce the correct output. I got away for a short time with dirty tricks, but eventually transitioned to a new design: I kept the lexer and parser, and implemented a data driven IR in the style of an ECS system to be built up before emitting output.

So I threw out the initial output component, but I learned a ton by starting with an end-to-end compiler, however incomplete. If I hadn't taken that step, and tried first to plan the perfect IR on paper, I am certain I would have reached an inferior result.

edit: and even the IR and compiler middleware is loosely coupled. The IR is essentially a set of flat data tables, each of which is built independently by walking the AST. And the compiler is implemented in a series of independent passes: i.e. one pass to build the IR, one pass to derive type information etc. so it's very much grown into a series of independent components, each of which could be independently rewritten without affecting the others very much.

If you have infinite time to recover, there is no problem, but you could also design something perfect using that infinite time.

A bit of thinking about design and architecture can save you a lot of time. Start with the wrong data structures and maybe you'll have to patch a lot of thing or just redesign everything from scratch.

Be an architecture astronaut and you may never release whatever you're suppose to develop.

It's all about trade-offs.

>upfront designing their programs instead of just jumping in. >This has taught me the lesson to always first try and think things through and come up with some kind of initial design, instead of just jumping in and writing code blindly.

100% One of my favorite techniques is "Super Pseudo Code" ! Why SUPER ?

Lol cause the "pseudo code" I write can barley be called "code at all" - It is usually just a text-file with a bunch of loosey-goosey-function-calls and parameters.

You know just to get a "feel" for how different entities(classes,struct,tables or libs - pick your poison) will interact and what might be needed. We not talking any UML-Diagrams here - really just text-files and functions/entities

This also works super-well for any multi-step-processes.

This is true for early high-level decisions. For every-day coding of smallish components in a large project, it matters much less.

The more code your design decision will affect, the more up-front planning it deserves.

I would argue if “high level design decisions” are getting in the way of coding, this is a sign of over-design or premature abstraction. If you write sufficiently loosely-coupled code, it’s not hard to re-organize later.

Some examples of high-level decisions: - which web framework? - which database? which ORM? which transaction isolation level by default? - will this game/UI be multiplayer? - what's our testing discipline?

You can't loosely couple around questions like these most of the time, at last not without excessive abstraction.

For "how do I structure this reasonably isolated 0-1kLOC component", I agree, easy to fix later if needed.

I think there are always ways to minimize coupling. For example if most of the code you write is pure functions operating on values, then swapping out your ORM might be a bit laborious, but it's going to be largely just a matter of typing, not tricky problem solving.

And like for example if you want to change web frameworks, that's something you can do incrementally. If you're talking about front-end, just find a way to encapsulate your old code behind a clean interface and start implementing new components in the new framework. If you're talking about back-end, then you can just implement new endpoints in a new language if you want even, and gradually migrate things over when you have to modify them.

> As they say "measure twice, cut once".

and also the reuse of the term architecture.. don't put beams at random and see if it works, plan in advance and calculate. They probably had these realizations thousands of years ago, it's a generic economy principle.

I forgot what the saying is but solution unfold themselves when you thought about the problem long enough.

Oh and lastly, Grothendieck said he wasn't in the business of solving problems, but expressing them.

If architects could freely reposition beams in a building, they might take advantage of that fast iteration rather than spending a lot of time calculating up-front.

I think it's antithetical, their profession exist only to avoid moving complicated stuff when it's too late. Of course architect can design wrong and then it's costly too.

> The more code I've written, the less I care about code quality.

I sort of agree with this, but not quite. I care about code quality, but not code aesthetics. Aesthetics was really important to me when I was younger and more inexperienced. I wanted my code to be pretty, and wouldn't be happy until I found an algorithm or abstraction that met my definitions of pretty code. I would polish it until it was shiny. I would even align my variable names to be pleasing to the eye.

20 years later, I know there are things that will just never quite look neat. FizzBuzz is a pretty accessible example of this phenomenon, but most non-trivial algorithms have that to some extent.

> Besides that, I'm a huge fan of disposable code. In my experience 99% of the time, the best approach is to just dive into the problem and try to solve the problem in the most pragmatic way. Maybe that's hard-coding a lot of things. Maybe that's having a small amount of repetition here and there. Maybe it's writing one long function with 1000 lines.

> After that it's all about continuous improvement. You spend your time solving the problem, and when your code becomes hard to work on, you spend time improving your code to make it easier to work on by cleaning things up, and adding sensible abstractions which solve the problems you actually have.

I too am firmly in the camp of write code first, refactor into a maintainable solution when it works. Maybe it's tacit experience refactoring messy code, sort of knowing in the back of your head how it will shape up when refactored.

People who have been coding for a while learn not to repeat their mistakes. Their code contains good-ish abstractions and other “clean code” features because they intuitively know what they are doing. The code they just wrote to get something done & shipped is probably somewhat “clean” by most standards.

But communicating those ideas to less experienced developers is where the problem comes in and all the prescriptive dogma arises.

But this happens in all fields. How many times do experts give some advice they don’t always follow themselves? Experts understand when and how to break the rules, and that comes with experience.

Almost right ;)

Novices need simple rules to follow. The world of a novice is filled with uncertainty, they have nearly zero intuition as to what's good or bad, so simple rules that get them 80% there are essential. Otherwise they'd get lost in the complexity.

However, with time, as they gather experience, learn, and mature, they should be able to figure out the reasoning behind the rules they were once given. That then will allow them to make decisions on whether the rule is appropriate for the given context or not.

Of course, getting to that point requires continuous improvement, which is why many, if not most, programmers don't get there.

Example: "Never use `goto` in C." - great advice for a beginner, they'd just make their code into spaghetti. However, a seasoned coder knows that `goto` is only a problem when used to jump to arbitrary points in the code, so using it to reduce duplicated error handling is perfectly fine.

Same with “premature optimization”. Many things can be fixed later. Some can’t or won’t, and those typically get ignored or relabeled as “good design” when it is still ultimately minmaxing cpu time versus developer brain cells.

> communicating those ideas to less experienced developers is where the problem comes in and all the prescriptive dogma arises.

I think a lot of it is just lack of context. A lot of "best practice" advice is valuable in certain cases but it gets over-applied, and people end up wasting a lot of time on things which don't matter.

> Besides that, I'm a huge fan of disposable code. In my experience 99% of the time, the best approach is to just dive into the problem and try to solve the problem

My approach is slightly different.

I think for a while and then start on the path that gets me to what I think is a common case. If the whole seems more complicated than reasonable, I back out the part that seems to be troublesome.

Eventually, I get one case "working". That case might not be complete, but it does something.

I then work on an adjacent case, using the same "back out the troublesome" process, going into a bit more detail (or perhaps deciding that some detail on the first case was wrong).

I repeat "work on adjacent cases" until most/all cases are handled. As I do more cases, I use opportunities to reduce the cognitive footprint.

>The more code I've written, the less I care about code quality.

Yea I understand 100% where you coming from ! I also these days try to focus more on "just getting it done/shipped". Lol I even went so far as to have my own little PHP-MicroFramework called "JGID" which means "Just-Get-It-Done" to remind me at EVERY LEVEL even code that is PERFECT but not shipped is not as good as medicore-core that is shipped ! YMMV

>I think the things I could point to in my coding practice which would make the code I write now better than the code I wrote 10 years ago would be:

I like this approach - instead of asking what is "Good Code" You asking, "How has my code improve in 10 years" a subtle change but I there is a lot of value in there.

This type of introspection-question reminds me of the very very common life-purpose question:

a) What will you do if you have a million dollars ? Sure good question... But I always found the better version of this is:

b)What will you do if you KNOW you won't fail ?

To be honest I think it might have originated from Tim Ferris. You like or dislike him, but what I love about him is his great ability to ask interesting questions.

>- I go for abstractions later, only when I need them, rather than trying to think of the perfect abstraction/design pattern which will solve the problem in the most elegant or clever way

Yup I've noticed this as well. I remember my very first paid coding job. Writing a roulette-wheel-number-reader. And I was so proud to have like a OOP-Hierachy of 3 levels and implementing AbstractFactories for multiple reader-types etc :D Only the "other cases/readers" never happen :)

>..After that it's all about continuous improvement..

Yes - I think I've also seen a similar effect, which is "better code" is a function of repeated-iteration of some process. It's like how woman like men that have a plan. Doesn't even have to be a good plan, just have a damn plan :D

> The more code I've written, the less I care about code quality. .. - I minimize interdependencies (changing a line of code should not affect something un-related) - I go for abstractions later, only when I need them, rather than trying to think of the perfect abstraction/design pattern which will solve the problem in the most elegant or clever way

It's funny, but those points you are describing are measures of code quality to me. The less interdependencies the higher I value the code, same for abstractions, most of the time it is the simpler the better. Except in those cases where they are explicitly required.

I always felt bad for doing things "the pragmatic way", but your comment made me realize that maybe I'm just not experienced enough to embrace the fact that no code is pretty from the start. Thanks!

Yeah sure! One realization which helped me with this: how many people will be affected by how your code is written, vs what your code does? Given that, where should you put most of your effort?

very important lesson, more than that actually

there's a lot of artistry, poetry, idealism in programming, but as a daily money making activity it just doesn't cut it. You have to reach goals as easily as possible (dry,yagni) fast without painting yourself in corners as much as you can (low coupling, min interdependencies). Finding the right variability points.

it's something school don't do well (saying this humbly) yet crucial

ps: I disagree with the article title. k&r, mccarthy's lisp, prolog, and many other have very clean general and beautiful code.

Yeah I think that there's a bias for programmers to think about artistry, poetry, and idealism in the form of code since that's what we're dealing with all day. But in reality it matters a lot less than we would like to think.

IMO whenever survival (and money, contractual relationships) occur, we will or must go to a different kind of idealism which maximizing the value/effort ratio.

I only "lead" one project (a minuscule thing by all means) and it was the first time I was responsible, and instead of burning out in rabbitholes, I discovered the bliss of being sharp cause I had near no time to allocate to anything. Suddenly only the minimum amount of change was important and you stop caring for so many parameters. It leads to a saner sense of skills and progress.

You also start to understand systemic ideas better, every patch or change will have your brain think "is this gonna rot fast ? or will it be nicely decoupled from the rest and more pros than cons in the future?". No effort is wasted, every step improves the system. It feels very good, and makes you want to do more of that. Unlike 99% of side projects where you spend days on DESIGN.md or TODO or watching conferences about <trick>

I still care, but the things I fret about have shifted substantially.

There are many categories of code problem that you don’t have to get right the first time. Some things can grow organically. But there are combinations that can be extremely resistant to change.

In particular, shared state is both state and coupling. Global shared state is a fucking nightmare, and almost made me quit my current job a couple months in.

I thought I could fix it, but I underestimated the number of hands in the code, and the longevity of the alliances I could make to get it done. The thing with a hideous mess is that the people who don’t mind it stick around, and they probably made it in the first place. Mostly what’s kept me here is the pandemic, and he fact that a lot of my energy is now in a hobby, not invested in my job. The tiebreaker was that some self-aware wolves have found slightly better code patterns and I have been exploiting that all I can. Write more like that, delete code like this ASAP. We have spent much of the last 18 months working on things I identified in my first six weeks. Not always in the most healthy way, but at least some people are looking at it.

I love "ergonomic code" expression and after years of coding I see it as much better term to strive for than "clean code".

I hope in real life you have enough discipline to practice things which people like me would call "code quality". Because taken literally it would lead to all those code bases I have had to maintain - barely a useful test in sight, an empty README.md, no javadocs, classes mixing multiple responsibilities, hundreds of LoCs in one class. Somehow all those things correlate and people who show a modicum of care in one area have others in a reasonable shape too.

It worries me that with the leetcode fad in vogue people will pay even less attention to the things which actually matter in real software development.

I think you might have missed the part of my post about eventually arriving at a well factored codebase

This is why I'm like "it works, and has worked for months(years) leave it alone and do better next time" to all the young engineers who like to sling around terms like bit rot (bits do not rot) and "technical debt". Technical debt is when the code becomes hard to comprehend or update, not just because of age or you know a new fancy dancy language or DSL of their own design we should be using. Also get off my lawn lol