Re:Intel's $20B Ohio factory could become world's largest ch...
by vel0city on Friday January 21, 2022 @04:18PM
(#30030130)
The previous poster is definitely massively oversimplifying things, and I do value your input as someone who actually works in the field. Obviously, there's still a lot of the same kind of controllers when it comes to all the switches and displays and motorized chairs and turn signal logic and all of those things which are practically the exact same as an ICE. And obviously there's some places where you don't need controllers and sensors on an EV where you would have them on an ICE, like mass airflow sensors and fuel injection controls and stuff like that. Meanwhile you do have additional circuitry like the inverters to actually drive the motors, BMS systems, there's still sensors on the motors and wheels and what not, brake regen, etc.
You mentioned the transmission is more complex compared to an ICE, but that does not make much sense to me at all. To my knowledge most EVs are essentially fixed gear ratio gearboxes, so you're either in drive, reverse, or neutral. Meanwhile ICE transmissions are becoming more and more like computer-controlled manual transmissions what with the rise in popularity of dual-clutch automatic transmissions. To me it seems a ton more complicated keeping track of operating that DCT than just "the dial is in D, change transmission to the forward mode."
You mentioned the transmission is more complex compared to an ICE, but that does not make much sense to me at all. To my knowledge most EVs are essentially fixed gear ratio gearboxes, so you're either in drive, reverse, or neutral. Meanwhile ICE transmissions are becoming more and more like computer-controlled manual transmissions what with the rise in popularity of dual-clutch automatic transmissions. To me it seems a ton more complicated keeping track of operating that DCT than just "the dial is in D, change transmission to the forward mode."