News for hackers. Stuff that matters.
Re:Add 10 GbE to your system with an M.2 2280 module by ThePadawan on Wednesday January 19, 2022 @03:01AM (#29991072)
I rent an apartment in a building that was erected around 2015. They laid an ethernet connection... with a 100Mbps bandwidth limit.

Some people just don't care.

Re:Add 10 GbE to your system with an M.2 2280 module by sjagoe on Wednesday January 19, 2022 @04:31AM (#29991594)
Are the ports in pairs at each location? Then it sounds like they did a Very Bad Thing and ran one cable per pair of ports; 100Mbps uses two pairs, so why use two cables when one cable has four pairs, right? :( I've seen that a lot in much older installations, but I'd expect better from 2015 construction.

I'm busy retrofitting Ethernet in my house by pulling cat6 through the walls and pulling out the old cat3 phone cabling. It's much harder work doing two cables (not least because none of the phone cables were in conduit, so it just starts off harder already) for each pair of ports, but it's very much worth the effort.

Re:Add 10 GbE to your system with an M.2 2280 module by ThePadawan on Wednesday January 19, 2022 @04:38AM (#29991642)
I phrased this intentionally vaguely, because the details are more complicated, but also don't matter.

They didn't care, they just laid some sort of cable because that's all they had to.

Re:Add 10 GbE to your system with an M.2 2280 module by sigstoat on Wednesday January 19, 2022 @12:37PM (#29996919)
> Are the ports in pairs at each location?

there are a variety of ways to screw that up. i've seen a house that has a bunch of cat 5e run, but the installer stapled it down, and most of the cables have a staple through them somewhere along the run, killing a pair or two.

Re:Add 10 GbE to your system with an M.2 2280 module by social_quotient on Wednesday January 19, 2022 @04:42AM (#29991667)
Curious why did you go with cat 6 and not 6a or 7? Thinking about doing similar but want to make sure I’m not missing something.
Re:Add 10 GbE to your system with an M.2 2280 module by jabl on Wednesday January 19, 2022 @05:01AM (#29991752)
Cat7 is not a recognized standard by TIA/EIA, but there apparently is an ISO standard for it. Also, cat7 doesn't use RJ-45 connectors so it's not backwards compatible with older gear.

Cat6a is probably the sweet spot for home/office/etc structural cabling. It's not much more expensive than Cat6 (or Cat5e in case people are still putting that up), and has more than enough legroom.

Re:Add 10 GbE to your system with an M.2 2280 module by philjohn on Wednesday January 19, 2022 @08:16AM (#29993187)
Cat Cat6a is a pain to retrofit as it's stiffer and thicker than Cat6 in most cases. It's also more expensive (less so than before, but the delta is still there)

If each run is <55m then Cat6 can still do 10Gbps.

Re:Add 10 GbE to your system with an M.2 2280 module by tblt on Wednesday January 19, 2022 @05:06AM (#29991789)
They may have done this to run a single cable to supply both data and telephony/door intercom etc on the other pairs. I agree it's not ideal.