News for hackers. Stuff that matters.
Re:A circuit-level redesign of the Game Boy Advance by adamrmcd on Friday January 07, 2022 @05:10PM (#29845525)
Had a blast reading through this and your CGZ work. Nice job!

Can you post the schematics? I'm really curious on how you changed things (LCD bias, debounce circuit, etc.)

Also, can you post a pic of the back with components populated, outside of the case?

Thanks!!

Re:A circuit-level redesign of the Game Boy Advance by Zekfoo on Friday January 07, 2022 @05:24PM (#29845706)
Glad you enjoyed them! Photos of both populated boards, both sides, should be available on the repos (if not embedded on the main README, check the Images/ folder).

I won't be sharing the schematics, though if you have any specific questions about something, I can try to answer as best I can.

RE: LCD bias - I mentioned in my AGZ writeup that the stock bias voltages aren't required when using the IPS displays, this also applies to the CGZ. This is because the LCD kits that I use have all the bias voltage circuitry built-in on their flex PCB adaptors, so I only needed to supply 3.3V/5V from my boards.

RE: Debounce circuit - Since the stock power switches carry the full system current, they can cause issues when they bounce due to dirty switch contacts. I redesigned the power switch circuit to instead use a high-side load switch implemented using a PFET with an RC time constant for debouncing.