I really want to like CFLs but with all of these disadvantages and how much more difficult they are to safely dispose of than a plain incandescent, I still haven't switched.
I'm not using any "name" bulbs (except in photo lighting, which is another kettle of fish entirely) at the moment (they're the cheapies from Canadian Tire) and it has been a long time since I've experienced mechanical noise, flicker or an unacceptable spectrum (there are only a few very small gaps, as revealed by a diffraction spectrometer -- er, a CD held at an angle, which has served me well as a photographer over the years).
And "pinkish" is weird -- it sounds like somebody's tried to use older "conventional" phosphors (which gave a very green-biased spectrum) and tried to overcompensate with the complement (magenta). I've never run into that with any of the brands I've tried (and I'm rather picky).
ADDED: the buzzing shouldn't be a problem with a recent bulb, either. That's an artifact of an older ballast design that I haven't seen used in years. All of the ones I've tried in the last five years or so have had high-frequency ballasts and long-decay phosphors to deal with the flicker issue (it's not an issue anymore), so the 120Hz buzz went away at the same time.
I think it's things like this that make mainstream adoption unlikely. And difficulty of safe disposal (but I'm being optimistic, and we might just get tons of mercury in our landfills if people are fine being negligent).
I'm stockpiling incandescents so I can wait and see if the LED technology proves itself in the real world.
I've heard the horror stories about spending $150 on lightbulbs only to have crappy light and having to replace a bunch of brokens but I haven't had that experience. Not sure if it's a brand issue or dirty power or something else.
First, they're quite cheap. Assuming you don't need dimmable CFL's, you can get them for less than $1/bulb. With my utility's incentive programs (Southern California Edison), I often see 60W replacements for ~$0.20/bulb.
Second, they've gotten quite a bit better. Less buzzing, less failure and an overall better quality of light.
So when new bulbs are put on the market it isn't unrealistic to expect them to work as least aswell as the ones they are supposed to replace. When they fail to do that, why should we risk even more money just because thay are supposed to be less bad now.
Running a 60W light bulb for 6-hours a day for a year costs - in California - $18.25. Multiply that by, I donno, 5 bulbs in your house and you're spending $91.25/yr on your lighting.
If you replace those 5 60W bulbs with 13W CFL's, and your cost is just $21.90/yr for the same amount of light. Even including the cost of buying 5 new CFL bulbs, and ignoring the cost of replacing your incandescent lights, you're going to save ~$65 in energy savings just the 1st year.
I run only the bulb in the room I am in, which means i would save less than 20$/year which is less than my low care limit.
Add the shit lighting early bulb death and possibility of mercury poisoning my room (you are supposed to leave for half an hour after you drop one, then clean up with heavy gloves) and replacing the bulb goes from an economically decent idea to something less than attractive.
The newer bulbs are definitely better, but they still don't last long in the wrong kind of fixture, and if that's the kind of fixture you have you're better off just buying incandescents.
Still and all, I'm glad to see something even better on the way.