BlueSCSI – Open, Low Cost, DIY SCSI to SD Device

Re:BlueSCSI – Open, Low Cost, DIY SCSI to SD Device – Tinker... by rasz on Saturday December 11, 2021 @04:55PM (#29524628)

>It's a lot easier to upload some zip files to JLCPCB, have them assemble it and then sell them on eBay for 4x the cost than it is to do the initial design.

but the author of BlueSCSI didnt do that initial design

"BlueSCSI created by erichelgeson is a fork of ArdSCSino-stm32" https://github.com/erichelgeson/BlueSCSI

[ Parent | on HN ]

Re:BlueSCSI – Open, Low Cost, DIY SCSI to SD Device – Tinker... by helfire on Saturday December 11, 2021 @11:14PM (#29527073)

I did do the initial design of this hardware. The ArdSCSino just mapped pins from the bluepill to a 50 pin header.

[ Parent | on HN ]

Re:BlueSCSI – Open, Low Cost, DIY SCSI to SD Device – Tinker... by rasz on Sunday December 12, 2021 @08:23AM (#29529416)

'just mapped pins' is how one could describe a pcb :)

https://github.com/ztto/ArdSCSino-stm32/blob/master/ArdSCSin...

https://github.com/ztto/ArdSCSino-stm32/tree/master/gerber

[ Parent | on HN ]

Re:BlueSCSI – Open, Low Cost, DIY SCSI to SD Device – Tinker... by helfire on Sunday December 12, 2021 @10:30AM (#29530359)

Ok. You may want to compare versions then. It seem you're very interested in it.

[ Parent | on HN ]