News for hackers. Stuff that matters.
Re:Games for IBM AS/400 by sillywalk on Saturday November 27, 2021 @12:56PM (#29361986)
I believe because the original AS/400 hardware used a proprietary CPU (Called IPMI ?) and proprietary RAM that had extra space for tag bits. When the AS/400 was moved to POWER processors, IBM added extensions for OS/400 called PowerPC AS[0], and uses some "magic" to store a tag bit in the ECC bits of standard RAM.

Also, "Fortress Rochester" by Frank Soltis (the follow up to Inside the AS/400) gives a detailed look at the differences compared to other systems.

[0] https://www.devever.net/~hl/ppcas

Re:Games for IBM AS/400 by skissane on Saturday November 27, 2021 @04:06PM (#29363485)
> I believe because the original AS/400 hardware used a proprietary CPU (Called IPMI ?)

Called IMPI (Internal MicroProgrammed Interface), the CPU architecture used by the CISC AS/400’s was the same as that used by the earlier System/38. Documented in this manual: http://bitsavers.org/pdf/ibm/system38/SC21-9037-3_IBM_System...

With AS/400, IBM stopped publicly so documenting these kinds of details, but most of that manual still applies to CISC AS/400. And, I believe IBM included a disassembler in the diagnostic tools shipped with the OS, which I assume would have known about any new instructions, so it would be possible (with sufficient effort) to work out what the changes in CISC AS/400 were.

The IMPI instruction set has some resemblances to the IBM 370 mainframe instruction set, but is not compatible with it.