News for hackers. Stuff that matters.
Re:The Soviet 1801VM2 LSI-11 Processor by ahartmetz on Thursday November 04, 2021 @09:29PM (#29114498)
Wow, the die shot! It looks like an eerie caricature of then-contemporary chip designs. I have seen blocky hand layouts, and modern (presumably) auto layouts that look like bacteria cultures. But I have never seen warped and slanted blocks.
Re:The Soviet 1801VM2 LSI-11 Processor by krastanov on Thursday November 04, 2021 @09:45PM (#29114572)
I could not find it on ddg/google right now, but I remember seeing some absolutely beautiful plant/vine-like trace routes done by the soviet auto-routing tools of past ages. I feel a bit sad that the 45degree aesthetic is the only one that survived today.
Re:The Soviet 1801VM2 LSI-11 Processor by marcodiego on Thursday November 04, 2021 @10:34PM (#29114869)
Re:The Soviet 1801VM2 LSI-11 Processor by the-dude on Friday November 05, 2021 @04:58AM (#29116897)
Parent is downvoted for only providing a link, but : TopoR is a free-angle PCB autorouter ( it has other tricks too ).

It is of Russian origin and commercial software!

Re:The Soviet 1801VM2 LSI-11 Processor by adrian_b on Friday November 05, 2021 @05:18AM (#29117001)
It is not a question of aesthetic.

In old integrated circuit manufacturing processes, with large minimum dimensions, it was possible to draw arbitrary curves without problems.

Some of the software tools were limited to straight lines or even to straight lines only at certain angles, just because the limitation simplified the algorithms, but if one really wanted, it was possible to draw anything on the masks.

On modern manufacturing processes, with extremely small minimum sizes, it has become more and more difficult to predict which will be the differences in geometry between what you draw on the mask and what will be made on the surface of the semiconductor wafer, after photolithography and etching of the layer that must be patterned.

In order to make the photolithography and etching processes more predictable, the design rules have become more and more restrictive, e.g. by allowing only vertical, horizontal and 45 degree straight lines, or only vertical and horizontal lines, or even on some layers only traces parallel to a certain direction.

Moreover there are a lot of extra constraints, e.g. the need to place dummy patterns around those that are useful, because the same pattern in a different neighborhood will be distorted in a different way, which could be hard to predict.

Re:The Soviet 1801VM2 LSI-11 Processor by Dork1234 on Thursday November 04, 2021 @10:02PM (#29114653)
I also thought 45 degrees is used to reduce ESD, provide the best use of die space, and reduce stress on the metal with high current. Maybe all of that is a myth? Any other angle doesn't have the same benefits.
Re:The Soviet 1801VM2 LSI-11 Processor by picture on Thursday November 04, 2021 @11:06PM (#29115015)
Any-angle routing may actually be better for use of space and reducing stress. I sometimes get more traces packed around a bend with any-angle. And most polymide PCBs are any-angle or at least super rounded with teardrops, having sharp transitions of any type would act as weak points.[1] ESD really doesn't make sense, maybe you meant EMI or EMC? There's nothing particularly special about 45 degrees other than the ease of modeling

[1]: Some macbook trackpad, note the polymide/flex substrate and rounded tracks. This isn't fully any-angle like what TopoR does though https://commons.wikimedia.org/wiki/File:Apple_MacBook_Pro,_m...

Re:The Soviet 1801VM2 LSI-11 Processor by dogma1138 on Thursday November 04, 2021 @09:42PM (#29114563)
I think it’s a mask diagram not a die shot, in any case these features are common for that era especially for the metal layers / ic traces look at die shots of a Z80 and it’s clones.
Re:The Soviet 1801VM2 LSI-11 Processor by ahartmetz on Thursday November 04, 2021 @09:46PM (#29114575)
Ah, yes. What do I know... but this Russian CPU still looks much more "weird" than a Z80! The Z80 has 90 and 45 degree angles, this thing also has like 10 degree angles, and wavy structures, and big curves, and triangles.
Re:The Soviet 1801VM2 LSI-11 Processor by Treblemaker on Thursday November 04, 2021 @10:15PM (#29114740)
I'm curious to see where you see the odd angles. When I zoom in sufficiently all the shapes seem to resolve to segments of 90 and 45 degree angles.
Re:The Soviet 1801VM2 LSI-11 Processor by dogma1138 on Friday November 05, 2021 @05:10AM (#29116952)
Here is an 8080 the topology isn’t that much different https://lh3.googleusercontent.com/-Z4RzZ24yNqU/WF4ffuFFN4I/A...
Re:The Soviet 1801VM2 LSI-11 Processor by ahartmetz on Thursday November 04, 2021 @10:44PM (#29114927)
Well OK, there is only one triangle - in the upper left corner. The other things I mostly see in the center and right of center. Especially in the blue lines - power and clock or so?