Benefits-wise, your devices are addressable on the Internet, so it becomes simpler to create peer-to-peer connections, firewall traffic, and create segregated subnets.
Security-wise, your devices are addressable on the Internet, so all the workarounds to punch through NAT with terrible security implications aren't needed (I'm thinking UPnP mostly, but STUN/TURN/ICE are easy to get wrong). Essentially, under IPv4+NAT, your devices are already "addressable" via a combination of your router's IP and some form of session token, but securing such traffic depends on the successful implementation of a NAT-traversal protocol by a third party.
Nope. By default home routers (e.g., Asus) will block incoming connections just like with IPv4. It may allow pings (ICMP) in, but that's usually it.
You have to manually go in and tell the router to allow new connections in (either generally, or per service/port), just like the "DMZ" functionality with IPv4 many routers have.
IPv6 doesn't solve the problem of everything in the internal network being unable to accept incoming connections. With a NAT you need to set up port forwarding. With IPv6 you need to punch a hole into your firewall. Either way, home users will not be doing it by hand... we'll invent some protocol to do it and that protocol will have security issues.
We don't have to. UPnP works just fine with ipv6 already. (upnp v1.1, appendix A)
I sure hope it does. Blocking ICMP can cause TCP connections to hang due to inability to do MTU size detection.
With IPv4 this is usually not as visible, but with IPv6 if you block ICMP your connections will block as soon as you try to transfer a large block of data.
At some point, that will go away due to CGNAT. A lot of people have to share their public IPv4 address these days, which means no inbound port forwarding, and potentially getting banned from services if their "neighbors" misbehave.
On the other hand, CGNAT does improve privacy to some extent.
Even with NAT'ing we're running out of IPv4 addresses.
Now I NAT on IPv4 at home, even though my router/ISP supports IPv6. First thing I do on any Linux install at home is get rid of IPv6. I don't see where the problem is. I really don't see why my home machines should have an IPv6 IP: the outside world sees my router's IP and that's it. Now I'm certainly misunderstanding all the benefits and security that IPv6 would bring me at home but meanwhile I'll stay on IPv4 and I really don't see what the problem is either.