News for hackers. Stuff that matters.
Re:Radio Station WWV by breput on Wednesday October 27, 2021 @09:02PM (#29021087)
Shutting it down would have made every single existing radio controlled clock e-waste, overnight. And not just random wristwatches and wall clocks, but school and industrial clocks. None of these will work with GNSS signals.
Re:Radio Station WWV by potiuper on Wednesday October 27, 2021 @09:07PM (#29021117)
That's the point, to stop creating this e-waste. If those applications are critical, then the owners should never have bought vulnerable radio controlled clocks in the first place.
Re:Radio Station WWV by gumby on Wednesday October 27, 2021 @09:33PM (#29021284)
Your assertion doesn’t even make sense. The hardware (wall clocks) could be older than gps. And gps is not only more expensive to receive, it’s harder too (most of those clocks would be indoors).

And the wwv signal is far more robust than gps.

Re:Radio Station WWV by potiuper on Wednesday October 27, 2021 @10:50PM (#29021810)
Radio clocks are vulnerable to signal loss and spoofing regardless if it is GPS, cellular, or HF. If the time accuracy is critical, then the time signal should be delivered by wire to device, especially indoors. Wall clocks should have a manual way to set the clocks given there has never been a guarantee to receive the WWV signal. If expense is the concern along with wireless capability, then an integrated 2.4GHz SoC could be used that costs pennies; https://www.beaglesoft.com/radsynreceiver.htm appears to cost hundreds.
Re:Radio Station WWV by gumby on Wednesday October 27, 2021 @11:26PM (#29022034)
Well of course you can’t design against every eventuality, just the most likely.

> If expense is the concern, ... costs pennies.

I don’t suppose you’ve ever worked on a product where a couple of pennies would sink the BOM. Not to mention antenna design and cost.