We need more addresses. That's the primary problem of IPv4 right now.
So if all the IPv4 code is written to handle 32-bit addresses, how do you create an addressing system that has more than 32-bits of data, but fits with-in a 32-bit data structure?
AFAICT, code updates will needed to occur on every device that needs to talk to the new address scheme. So what's the difference between updating every device to handle IPv6 versus updating every device to handle this hypothetical IPv7?
IETF also asked that for AS numbers (which were only ~60,000 originally!) Sure enough, there were some reserved bits actually on the spec, which they used to add an extended address. Nowadays, the original BGP actually operates on a single number: AS23456 and the actual AS number is on that reserved spot.
What's worse is that it was actually already proposed in 1992 (https://datatracker.ietf.org/doc/html/rfc1347). Did it work? Actually, yes! Why IPv6 then? Because it's shiny!
> The long term goal of the TUBA proposal involves transition to a worldwide Internet which operates much as the current Internet, but with CLNP replacing IP and with NSAP addresses replacing IP addresses.
[…]
In §3 Migration:
> Updated Internet hosts talk to old Internet hosts using the current Internet suite unchanged. Updated Internet hosts talk to other updated Internet hosts using (TCP or UDP over) CLNP. This implies that updated Internet hosts must be able to send either old-style packets (using IP), or new style packet (using CLNP). Which to send is determined via the normal name-to-address lookup.
So you're replacing IPv4 with something that is not-IPv4 on every router and every host. During the transition period everyone will have IPv4 and not-IPv4 addresses.
How is not-IPv4 being CLNP/NSAP any different that not-IPv4 being IPv6? What am I missing?
In §6 on DNS:
> TUBA requires that a new DNS resource record entry type ("long-address") be defined, to store longer Internet (i.e., NSAP) addresses.
Which is basically describing AAAA records.
Prefixing all IPv4 with 0.0, opens up another 64k copies of the 4 billion address space of a.b.c.d. This would have been far easier for everyone (not just a few admins, but everyone that ever has to deal with an IP address) - to understand and deal with. It still could be, with the aforementioned-yet-not-developed-nor-propsed IPv7.
I've seen some places running ATM hardware which was phased out two years ago. it has been running for well over 20 years.
people also seem to forget that with a new network protocol, new designs probably need to be made to make use of new (much needed) features.
those designs already exist in ipv6.
A ipv4-only host cannot ever directly communicate with a IPv6/IPv7/.. host. The issue is simply that you cannot fit more than 32bit of information into 32bit.
There are plenty of migration technologies that exist to integrate IPv4 and IPv6 (NAT64, tunneling ipv6 over ipv4, etc. etc.). And anything like IPv7/IPv6-light will end up with the same issues and solutions you are facing today with IPv6.
Plenty of good migration options exist(ed) that allow for each host to be single stack and still talk to each other while upgrading at different rates. The basic approach was a simpler ipv6 that didn't change all the concepts around with an ipv4 range embeded in it.
Routing then just proceeded as normal, but if an IPv6 host was trying to talk to an IPv4 host, if the next step in route was IPv4, then router drops the extra IPv6 bits (would likely have been hop before server).
Conversely, when IPv4 host is talking to an IPv6 only host, they are routing back, and then when the next link in route is IPv6 only you rehydrate the IPv4 address with the IPv6 IPv4 prefix. The IPv4 network is talking to you using IPv4+PORT. The Port is basically how we get extra address space ALREADY with IPv4 and CGNAT (but to allow transition now you map that inbound IPv4+PORT to an IPv6 address. Being smart you can actually do a predictable mapping here if you wanted).
Other little tweaks make this better - but the key is that I as an end user can go IPv6 only on my network (ideally in a more IPv4 style without the complexity).
Anyways, some networks are already converging / heading this way with things like X64LAT or whatever - allowing devices to basically see an IPv6 only world. But you are still dragging along this insane IPv6 complexity
v6 isn't really very complex. In fact it's generally simpler than v4, especially when you run out of v4 address space and NAT gets involved.
So how does a VPS / cloud provider use the +PORT to give themselves and their customers more publicly-available addresses to assign to virtual machines?
> Plenty of good migration options exist(ed) that allow for each host to be single stack and still talk to each other while upgrading at different rates.
Do you have any citations for these options?
The counterpoint gets repeated and repeated all over, because it was already done in BGP.
Unfortunately, most are purists who will never look at using TUBA (https://datatracker.ietf.org/doc/html/rfc1347) or something because they want "clean code" or something.
Real world is messy, and code should adopt over it.
This was brought up in another part of the thread. I'm copy-pasting my reply:
---
From the RFC (emphasis added):
> The long term goal of the TUBA proposal involves transition to a worldwide Internet which operates much as the current Internet, but with CLNP replacing IP and with NSAP addresses replacing IP addresses.
[…]
In §3 Migration:
> Updated Internet hosts talk to old Internet hosts using the current Internet suite unchanged. Updated Internet hosts talk to other updated Internet hosts using (TCP or UDP over) CLNP. This implies that updated Internet hosts must be able to send either old-style packets (using IP), or new style packet (using CLNP). Which to send is determined via the normal name-to-address lookup.
So you're replacing IPv4 with something that is not-IPv4 on every router and every host. During the transition period everyone will have IPv4 and not-IPv4 addresses.
How is not-IPv4 being CLNP/NSAP any different that not-IPv4 being IPv6? What am I missing?
In §6 on DNS:
> TUBA requires that a new DNS resource record entry type ("long-address") be defined, to store longer Internet (i.e., NSAP) addresses.
Which is basically describing AAAA records.
---
* https://news.ycombinator.com/item?id=28326806#unv_28328593
How exactly does TUBA solve the problem where ipv4-only host wants to communicate with a non-ipv4 host? This proposal solves none of the issues we are facing of IPv6. The RFC suggests some of the transitional technologies that are in issue with IPv6 today/the past: tunneling IPv6 over IPv4 (6in4, teredo, etc.), dualstack, NAT64 and other mapping, AAAA recrods in dns. But it doesn't get around the fact that you cannot fit more than 32bit of information into a 32bit address.
it is far easier to convince a couple of thousand organizations to modify their highly specialized infrastructure compared to end users and manufacturers who just want to use or create widgets which will do what is required.
This exists for IPv6 and would need to exist for any alternative proposal. And there are certain deployments of this in action, where hosts only have IPv6 and they only receive IPv4 connectivity via NAT mapping at the edge.
One issue with it is however that it doesn't address the address exhaustion issue since you would still need one IPv4 address for each IPv6 address you want to map to.
literally every single iOS app is required to fully support ipv6 and will not pass apple review if it doesn't.
Well if an app developer does not ensure that their code works on a device that only has an IPv6 address they will be in for a big surprise: lots of mobile telcos only give out IPv6 addresses.
Connecting to the IPv4 world is done via CG-NAT with the first few hops being IPv6-only.
Here's a guy from T-Mobile presenting on it:
Some group will not move at all. IPv4 is fine for them.
And the rest of the world will get an endless amount of translation between IPv4 and the new protocol that is a nightmare to debug.
There is also the big question whether there actually exists a better transition path. I have not seen any ideas that are likely to be accepted on a large scale by the networking community.
Name me an existing system where:
a) requires IPv6; but
b) not because of its long address.
Good luck finding such a system.
most modern telecom uses ipv6 for LTE communication, with nat64 to communicate with ipv4.
None of it is IPv4.
T-Mobile's core network is entirely IPv6, IPv4 lives on the edge only.
Facebook's entire internal network is IPv6, they have IPv4 edges that translate to IPv6 internally so that it is routed as if it were IPv6 and all services see IPv6 only.
Sorry, but your "adoption is low" is very VERY wrong and IPv6 has already solved a lot of problems, for example the "we are out RFC1918 space, and adding more NAT is not the solution".
That last part is literally why Comcast moved to an IPv6 core.
Knowing the historical transition issues collected over the past 20 years, we could, as an industry and society, design a next generation and provide a reasonable rollout target of, say, 2030, and move towards that.
Since 1998/99, there's been an explosion of networking, and large cultural shifts (billions of mobile devices, IoT, etc) which were not around when all this was specced out. No technology adopted IPv6 as a default during that time, and I dare say most things (services, devices, etc) aren't even tested against IPv6.
After 20+ years of this, I see IPv6 as a failure, even if there is 30-50% adoption (or perhaps because of those figures).