But perhaps this system of analyzing the test signals and figuring out how to create the waveforms that will sum up for the receiver happens so fast that it is not a problem to recalibrate constantly to take in account cell phones in moving cars, etc.
Sounds like the scheme is going to wreak havoc on the battery life of a typical mobile device.
The whole scheme seems really dependent on knowing the position of all transmitters/receivers at all times.
At higher speeds, low frequency/long wavelengths ought to work better because the constructively interfering areas will be larger for any single receiver than they would be with a shorter wavelength. Also, when the receiver is traveling at constant velocity, it is very easy to predict where the receiver will be in the next frame. This covers a lot of cases (people on planes, cars, trains).
In fact, I can't think of a place where an average person (e.g., not someone flying a fighter aircraft) would be moving rapidly and unpredictably.
Even trying to empirically map certain performance profiles to certain spaces may be impractical if the client radios and antennae performances differ enough to throw off the profiles, which if I understand this properly and given our proclivities for making things as cheap as possible, probably means this won't work either.
DIDO communication begins with the DIDO APs exchanging brief test signals with the DIDO user devices. By analyzing what happened to these test signals as they propagate through the wireless links, the DIDO Data Center determines precisely what will happen when it transmits data signals from the APs to users, and how the simultaneously transmitted signals will sum together when received by each user device. Then, the DIDO Data Center uses this analysis, along with the data each user is requesting (e.g. video from a website), to create precise waveforms for all of the APs that, when transmitted at once will sum together at each user device to create a clean, independent waveform carrying the data requested by that user. So, if there are 10 APs and 10 users all within range of each other, then 10 radio signals will sum together at each antenna of each user’s device to produce an independent waveform for each device with only that device’s data.