News for hackers. Stuff that matters.
Re:A simple mistake that stuffed up world temperature record... by crazygringo on Sunday July 11, 2021 @10:04AM (#27800892)
Thanks again.

I can see it basically depends on a lot of factors.

I'm presenting temp/humidity numbers that are reasonable for where I live (NYC where the summers still are pretty hot and humid), but your numbers are much more extreme (and god forbid they should be daily averages!). And then, you're dehumidifying down to 45% RH -- my consumer-level heat pump doesn't even have that option. In the summer (like today) it never goes below 65% RH indoors on hot humid summer days, even if I put the indoor temperature as low as 68°F -- I can't control the humidity. I'm sure for office HVAC systems there's more control.

Also as another commenter mentioned, I'm also mostly cooling indoor air that's already had the humidity removed. You commented that typical houses have 0.5-2 air changes per hour, but my new-construction NYC apartment is nothing like that. It's maybe 0.5 air changes per day, it's so tight -- I know because I have a CO2 meter so I know when to open the windows and run a fan to force fresh air when levels double. Again, professional office buildings might bring in a lot more fresh air -- my apartment is new-construction so pretty airtight, and with a split heat pump so it can't intentionally bring in air from anywhere. It's not some massive HVAC.

Anyways, it seems like we're both right -- in a regular new-construction home in a climate where it makes sense to use a heat pump both for heating and cooling, heating and cooling costs are roughly the same for a temperature difference in either direction (as reflected by my electric bill). While in a humidity-controlled office building in an extremely humid tropical climate with tons of airflow where you can control the humidity level independently, the energy usage for cooling and removing humidity could significantly exceed the energy used for cooling air.

Re:A simple mistake that stuffed up world temperature record... by pdonis on Monday July 12, 2021 @11:11PM (#27817310)
> I'm presenting temp/humidity numbers that are reasonable for where I live (NYC where the summers still are pretty hot and humid)

NYC, while it does get fairly hot in the summer, is actually not very humid compared to South Texas or South Florida.

> you're dehumidifying down to 45% RH -- my consumer-level heat pump doesn't even have that option

A typical home A/C system (not heat pump, just straight A/C) in South Florida or South Texas will output a dewpoint of around 50 to 55 degrees F. (I used 12 C = 53.6 F in my heat transfer calculations upthread.) That's significantly lower than the typical dewpoint output of a heat pump (different working fluids, hence different temperatures at the indoor heat exchanger).