News for hackers. Stuff that matters.
Re:The historical significance of DEC and the PDP-7, -8, -11... by AnimalMuppet on Friday July 09, 2021 @12:55PM (#27785764)
It was a bit more than that. At the time, chip technology wasn't at today's level; you couldn't put a 32-bit (or, originally, even 16-bit) system on a single chip. So micros were much less capable than minis. A mainframe was a computer that could run a company, with both the price and the performance to match. A mini wasn't that costly or that powerful, but it could run a department. A micro wasn't powerful enough to even do that, but it was much less expensive.

So, yes, it was "single chip CPU", but that correlated with a bunch of other things...

Re:The historical significance of DEC and the PDP-7, -8, -11... by CountSessine on Friday July 09, 2021 @01:32PM (#27786212)
Yeah - and when the first single-chip CPUs were made, they were extremely cut-down. Forget about TLBs and operating modes - the intel 4004 didn’t even have hardware interrupts! They had to dispense with any kind of interrupt-driven IO and instead had to poll hardware.

It was a big challenge getting an entire CPU on a single chip back then. Arguably, every single microprocessor from the 4004 to the 386 was just restoring features that the minicomputers originally had.

Re:The historical significance of DEC and the PDP-7, -8, -11... by ghaff on Friday July 09, 2021 @03:18PM (#27787460)
Yeah, it wasn't that clear cut. After all, earlier micro CPUs like the 8088 had optional external floating point units. In general, memory management was integrated with the CPU early on in micros whereas it was a separate chip in mid-80s mini designs I'm familiar with. I/O was pretty separated out in both cases at that time as well.

The distinction is probably more around Andy Grove's horizontal stack of "commodity" microprocessors, OSs, etc. vs. the vertical stack of the micros where one company mostly made everything.

Re:The historical significance of DEC and the PDP-7, -8, -11... by AnimalMuppet on Friday July 09, 2021 @04:58PM (#27788418)
> In general, memory management was integrated with the CPU early on in micros whereas it was a separate chip in mid-80s mini designs I'm familiar with.

Memory management didn't make it into micros until the 386 generation. (At least on-chip memory management didn't.) In terms of this discussion, that's pretty late.

Re:The historical significance of DEC and the PDP-7, -8, -11... by pinewurst on Friday July 09, 2021 @06:18PM (#27789153)
I’ll disagree because the 286 systems have quite a capable MMU - capable of running demand paged 286 System V Unix. Not that 64K segments were ultimately that useful as systems grew. But a better MMU than any PDP-11 for sure.
Re:The historical significance of DEC and the PDP-7, -8, -11... by AnimalMuppet on Friday July 09, 2021 @06:43PM (#27789352)
But as a separate chip, right? It wasn't on the same die as the 286, was it?
Re:The historical significance of DEC and the PDP-7, -8, -11... by icedchai on Friday July 09, 2021 @07:00PM (#27789487)
My understanding is the 286 had a limited MMU on board, with memory protection based on 64K segments. Some other CPUs, like the Motorola 68020, did require separate MMUs.
Re:The historical significance of DEC and the PDP-7, -8, -11... by AnimalMuppet on Friday July 09, 2021 @07:42PM (#27789712)
Yes, the 68020 had a separate MMU; the 68030 had it on-chip.
Re:The historical significance of DEC and the PDP-7, -8, -11... by pinewurst on Friday July 09, 2021 @07:25PM (#27789625)
It was on the same die. Just segmented though, not paged (I was incorrect), though it did run protected Unix and Xenix quite well.