Racing slicks are a different material.
In Formula 1 racing, you go through multiple tires in one race.
In consumer driving, tires are expected to last 100,000 km or more.
There is even the practice, in racing, of using chemicals to attack the rubber to soften it.
They could easily make a tyre which lasts the length of a race, but they mandate pit stops and two different tyre compounds to add interest - teams can use the mandatory pit stop to “undercut” or “overcut” competitors.
In fact, IIRC, for the 2005 season, changing tyres mid race for anything other than safety reasons was banned.
> In consumer driving, tires are expected to last 100,000 km or more.
This is much closer to 25,000-50,000km, and peaking at 70,000km. Source: https://www.pirelli.com/global/en-ww/road/how-many-kilometre...
Also, F1 cars are going up to 246 mph and doing heavy acceleration and breaking throughout the races, which seriously heats up the tires. Normal road tires would actually die sooner under those conditions. Just read up on who long tires last when people are doing street racing, burnouts, etc.
Slick tyres are not suitable for use on common road vehicles, which must be able to operate in all weather conditions. They are used in auto racing where competitors can choose different tyres based on the weather conditions and can often change tyres during a race. Slick tyres provide far more traction than grooved tyres on dry roads, due to their greater contact area but typically have far less traction than grooved tyres under wet conditions. Wet roads severely diminish the traction because of aquaplaning due to water trapped between the tyre contact area and the road surface. Grooved tyres are designed to remove water from the contact area through the grooves, thereby maintaining traction even in wet conditions.
The adhesion is greatest in the front of the contact patch where there is less slip and a wide tire has a wider but shorter contact patch, so it has more grip from adhesion.
If you keep the pressure in two tires the same, a wider tire will have the same contact patch area as a narrow tire since they will carry the same force and force is pressure multiplied with the area.
This is an approximation. It holds here, but it doesn't hold for (say) figure skates on road.
(I promise I will keep that in mind the next time I attach skates to a bicycle frame.)
E.g. A carbide bit milling a stainless steel object is clearly not following carbide-on-stainless coefficient of friction.
You get a larger contact patch from a wider tire, but that patch has less pressure.
Grip (static friction) is coefficient of friction, times weight. The coefficient of friction is a constant which depends on the materials. Rubber on road is no exception.