Re:Dump your fluorescents and incandescents for this amazing...
by HeyLaughingBoy on Thursday July 07, 2011 @04:59PM
(#2740287)
While it's certainly possible to do so, I doubt any engineer worth his salt would actually use a zener and resistor as a stable power supply for automotive lighting. Voltage in cars varies from pretty low (sub-8 volts or so) when the starter is cranking, to around 14-16 volts when alternator is running against a fully charged battery, to the occasional high voltage peaks of 40V+ when, e.g., the air conditioner clutch disengages.
That's a pretty large range to run a current-driven device (the LED) from a fixed resistor. Most useful applications these days will use constant-current supplies that feed the LED a fixed amount of current as the input voltage changes all over the place.
That's a pretty large range to run a current-driven device (the LED) from a fixed resistor. Most useful applications these days will use constant-current supplies that feed the LED a fixed amount of current as the input voltage changes all over the place.