News for hackers. Stuff that matters.
Re:Dump your fluorescents and incandescents for this amazing... by huhtenberg on Thursday July 07, 2011 @11:57AM (#2738986)
Philips went a much simple way. They just painted the bulb enclosure yellow, and it works really well. The color gets very close to that of incandescent. The only issue is its price. It is very hard to bring oneself to pay $49 for a light bulb. Economics or not.

http://www.homedepot.ca/wcsstore/HomeDepotCanada/images/cata...

Re:Dump your fluorescents and incandescents for this amazing... by weeny on Thursday July 07, 2011 @12:12PM (#2739048)
it's not exactly a yellow paint, it's a phosphor doping they embedded in the plastic and it's the reason the bulb costs so much. Theirs is very high tech but I don't think it can compete in the long run due to complexity and the costs associated with it.
Re:Dump your fluorescents and incandescents for this amazing... by mturmon on Thursday July 07, 2011 @01:52PM (#2739507)
For more on the physics behind "white" LED's, there's a pretty good summary at:

http://en.wikipedia.org/wiki/Light-emitting_diode#White_ligh...

The fundamental challenge is that the wavelength of light emitted from the LED is constrained by the band gap structure of the diode. To get white-looking light, you need more than just one narrow frequency band.

For instance, until some new materials were developed in the 1990s, this is why there were no blue LEDs, only red, green, and amber.

Re:Dump your fluorescents and incandescents for this amazing... by billswift on Thursday July 07, 2011 @04:32PM (#2740187)
Bob Johnstone's We Were Burning has a fascinating look at the development of the first blue laser diodes.

http://www.amazon.com/We-Were-Burning-Entrepreneurs-Electron...

Re:Dump your fluorescents and incandescents for this amazing... by gamble on Thursday July 07, 2011 @07:14PM (#2740673)
I have this bulb. The phosphor has one killer feature: it gives a much broader emission pattern than any LED+reflectors bulb on the market. Every other LED bulb I've tried has been too directional to use for general lighting.
Re:Dump your fluorescents and incandescents for this amazing... by mahyarm on Thursday July 07, 2011 @01:54PM (#2739521)
Why don't they just paint it then, or put in some simpler kind of yellow plastic?
Re:Dump your fluorescents and incandescents for this amazing... by weeny on Thursday July 07, 2011 @02:27PM (#2739662)
The idea is that the yellow phosphor converts a short wavelength blue light from the LED into a longer wavelength yellowish light, called down-converting.

This is a special physical property of the phosphor material - not simply a function of its color.

Normally this yellow phosphor material is applied directly to the LED die - but they figured they would put it on a plastic shell outside the LEDs. It doesn't actually make any kind of performance improvement except that the light is more evenly distributed.

If you tried to paint the shell with the phosphor - you would most likely have blue light shining through it - that's why they need so much technology to accurately dope the plastic phosphor, so that the light output is an even and consistent color.

Re:Dump your fluorescents and incandescents for this amazing... by djahng on Thursday July 07, 2011 @07:05PM (#2740648)
The LEDs are typically blue with a phosphor that is energized by the LED light. It's the phosphor layer that starts to glow and produce the white light.

If you "paint" a surface a particular color to alter the light transmitted through it, you're effectively creating a filter. If you want something to appear more yellow, you need to increase the amount of yellow wavelengths transmitted through the filter by reducing the other wavelengths. But if you have a single color LED, such as blue, there are no other wavelengths present (at least not in any significant amount). So if you put a yellow filter over a blue LED, you see nothing...

Re:Dump your fluorescents and incandescents for this amazing... by Daniel_Newby on Thursday July 07, 2011 @01:17PM (#2739335)
"... it's a phosphor doping they embedded in the plastic and it's the reason the bulb costs so much."

It costs so much because if something cannot compete on cost, it has to compete on premium features at a higher price point.

Re:Dump your fluorescents and incandescents for this amazing... by gamble on Thursday July 07, 2011 @07:07PM (#2740652)
I bought one of these as an experiment. I've been trying out LED bulbs for a while, and this is the first one that's worked well enough to be a viable CFL replacement. Unlike others I've tried, this bulb has great color temperature, brightness, and non-directionality. It's also small enough to fit in almost any lamp or fixture. The only downside is price ($40 at Home Depot) and the lack of a 100W equivalent option.
Re:Dump your fluorescents and incandescents for this amazing... by hapless on Thursday July 07, 2011 @12:45PM (#2739187)
This is exactly what I have wanted for years. I'm willing to bet $100 on a pair of them, just to see how it works out.