Re:Setting up a Raspberry Pi with 2 Network Interfaces as a ...
by rocky1138 on Thursday May 20, 2021 @08:55PM
(#27229333)
I use a similar method to share Internet with my Tandy 1000 via an old laptop I've used as a server for years. LAN via Ethernet coming in, network forwarding via iptables, and serial null modem cable to the Tandy. Unfortunately, I don't get anywhere near 750-800 Mbps but 6 Kbps :)
[ Parent
| on HN ]
Re:Setting up a Raspberry Pi with 2 Network Interfaces as a ...
by kQq9oHeAz6wLLS on Friday May 21, 2021 @01:03PM
(#27236730)
You should take a look at serial-to-ethernet converters like the USR-TCP232-T2. I use one with my VIC-20 to telnet into BBSs. Uses a modified AT command set, so you can actually control it a bit like a modem. Picked it up for $10 off eBay a few years back.