Re:Spin-torque oscillators for WiFi band transmission and en...
by dr_orpheus on Tuesday May 18, 2021 @11:39AM
(#27196136)
The current you refer to there is not the power that is being generated though, it seems to be an input in to the STO devices.
> The STOs are connected in parallel (Fig. 1a) or in series (Fig. 1b) configuration, stimulated by a single dc source. For the parallel connection, at the dc bias (Idc) value of 1.5 mA
Fig 2c and d shows the total output power which maxes out at 0.85 uW. Maybe this is enough to run a pacemaker or something small, I don't actually know. Fig 6 shows the rectification of the signal in to a voltage that can turn on an LED. The dc-dc converter puts it in the ~3V range. Assuming the dc-dc converter is near 100% efficiency (some are pretty damn good) this is a current of only 0.28 uA.
Its a novel way, but they talk about in their own paper that it is not a new more efficient way to convert RF energy to DC energy
> in the range of 1.65–2.8 GHz at Prf = 0 dBm and zero dc bias ac to dc conversion efficiency of ∼6% at Prf = −20 dBm. This is higher than the reported values for STOs53,55 but less than the recent reports of power conversion efficiency of 40% and 40–70% at an input rf power ~0 dBm for MoS2-based flexible rectenna and state-of-the-art Si and GaAs rectifiers56
> The STOs are connected in parallel (Fig. 1a) or in series (Fig. 1b) configuration, stimulated by a single dc source. For the parallel connection, at the dc bias (Idc) value of 1.5 mA
Fig 2c and d shows the total output power which maxes out at 0.85 uW. Maybe this is enough to run a pacemaker or something small, I don't actually know. Fig 6 shows the rectification of the signal in to a voltage that can turn on an LED. The dc-dc converter puts it in the ~3V range. Assuming the dc-dc converter is near 100% efficiency (some are pretty damn good) this is a current of only 0.28 uA.
Its a novel way, but they talk about in their own paper that it is not a new more efficient way to convert RF energy to DC energy
> in the range of 1.65–2.8 GHz at Prf = 0 dBm and zero dc bias ac to dc conversion efficiency of ∼6% at Prf = −20 dBm. This is higher than the reported values for STOs53,55 but less than the recent reports of power conversion efficiency of 40% and 40–70% at an input rf power ~0 dBm for MoS2-based flexible rectenna and state-of-the-art Si and GaAs rectifiers56