News for hackers. Stuff that matters.
Re:Electrical impedance made easy - Part 1 by lcargill99 on Sunday June 26, 2011 @12:27AM (#2697377)
At audio frequencies, characteristic impedance is almost always irrelevant.

hi-Z is a crystal mic, guitar pickup or crystal phono pickup source.lo-Z is a dynamic or condenser mic source. Obviously, a preamp may be used as an impedance converter to lower hi-Z to loZ. There's such a preamp in the condenser mic.

The cables are hiZ or loZ only in that they're generally used with one source or the other. But that's by convention. loZ is usually a balanced XLR connection; hiZ is generally an unbalanced 1/4" connection.

hiZ is generally at around 1 megohm. loZ is archetypally 600 ohm. Line is neither; it's 10,000 to 50 or 100k ohm.

There are no comments on this comment yet.