News for hackers. Stuff that matters.
Re:Ask HN: Are there any standard monochrome low resolution ... by bestcoder on Sunday April 25, 2021 @01:45PM (#26934720)
Yeah I'm not sure how to drive it either. I'd like to use any sp32 but that only has like 40 gpios max. I think you can set up logic gates or something I don't even know what that means except very superficially superficially I'll cross that bridge when I get there
Re:Ask HN: Are there any standard monochrome low resolution ... by pjc50 on Sunday April 25, 2021 @02:58PM (#26935492)
This display sounds very similar to LCDs, for which you can get row/column driver ICs.

> I think you can set up logic gates or something I don't even know what that means except very superficially superficially I'll cross that bridge when I get there

It sounds like this bridge is a long way in the distance.

Re:Ask HN: Are there any standard monochrome low resolution ... by evan_ on Sunday April 25, 2021 @02:09PM (#26934994)
Look into addressable leds like the WS2812... you can wire them up in series (or buy them pre-soldered on tape) and you can control hundreds of RGB leds independently with just two wires.

Adafruit sells tape as well as matrices of the stuff which might be what you’re looking for

Re:Ask HN: Are there any standard monochrome low resolution ... by evan_ on Sunday April 25, 2021 @05:08PM (#26936708)
if you’re dead set on controlling individual LEDs look up “charlieplexing” which will let you use n pins to control n^2-n LEDs
Re:Ask HN: Are there any standard monochrome low resolution ... by juancn on Sunday April 25, 2021 @07:09PM (#26937588)
There are I2C matrix displays that shouldn't need many GPIO ports.