News for hackers. Stuff that matters.
Re:How I built a €25K Machine Learning Rig by emilwallner on Tuesday April 06, 2021 @05:17AM (#26709765)
Hey, I made a machine learning rig with four NVIDIA RTX A6000 and an AMD EPYC 2 with 32 cores, including 192 GB in GPU memory and 256GB in RAM.

I made a 4000-word guide for people looking to build Nvidia Ampere prosumer workstations and servers, including:

- Different budget tiers

- Where to place them, home, office, data center, etc.

- Constraints with consumer GPUs

- Reasons to buy prosumer and enterprise GPUs

- Building a workstation and a server

- Key components in a rig and what to pick

- Lists of retailers and build lists

Let me know if you have any questions!

Re:How I built a €25K Machine Learning Rig by geoah on Tuesday April 06, 2021 @06:00AM (#26710025)
I'd be really worried about thermals. The cards are very close to each other for an open air case, I'd expect it would need a case and enough fans to create some air pressure.

There is some weird parts about mining rigs that I don't really agree with.

"pcie risers" - as the author pointed out mining rigs usually go for 1x PCIE risers through USB cause they don't care about bandwidth - but that doesn't mean you need to go for that as well, you could have gone for 16x PCIE risers just fine which is just a long ribbon cable usually shielded.

"mining rigs use crappy PSUs from alibaba" - you can use whatever PSU you want.

Re:How I built a €25K Machine Learning Rig by emilwallner on Tuesday April 06, 2021 @09:03AM (#26711279)
I converted it into a server, I've been running it on full load for a week and the temperatures are 80C +- 2 degrees. I don't know if there is a way to use x16 cables without transferring electricity? Thus, mixing circuits. Consumer PSUs are maximum 2000W, so you have to turn to Alibaba for +2100 W PSUs.