I’ve made a Cursed USB-C 2.0 device

Re:I’ve made a Cursed USB-C 2.0 device by TheRealSteel on Monday March 22, 2021 @08:37AM (#26539946)

I believe to properly conform to the USB specification, the device must be tried one way, tried the other way, then tried the first way again before it plugs in properly.

[ Parent | on HN ]

Re:I’ve made a Cursed USB-C 2.0 device by NoOneNew on Monday March 22, 2021 @09:23AM (#26540418)

Calm down there Satan.

Though, in all seriousness, it would make an interesting security through obscurity feature. Everything works fine with the device, but only allows/shows certain features/files after Satan's rotation pattern. More secret squirrel than "security" in reality.

[ Parent | on HN ]

Re:I’ve made a Cursed USB-C 2.0 device by Nullabillity on Monday March 22, 2021 @07:22PM (#26548832)

Combine with a gyro to ensure that the rotations are made in the correct respective directions.

[ Parent | on HN ]

Re:I’ve made a Cursed USB-C 2.0 device by dogma1138 on Monday March 22, 2021 @09:11AM (#26540282)

You forget the chicken bones and the tears of a Virgin step.

[ Parent | on HN ]

Re:I’ve made a Cursed USB-C 2.0 device by fuzzfactor on Monday March 22, 2021 @09:27AM (#26540456)

>“I’ve made a Cursed USB-C 2.0 device”

You and everyone else.

I knew this was not going to be ideal in the late '90's when USB 1 came out.

Radio Shack was still going strong but this was the first PC connector that you could not purchase plugs or jacks for to solder your own. Also no suitable 4-conductor cable.

Even though the USB 1 approach was for a 92 foot maximum cable length (since it was only intended for the low-bandwidth webcams at the time) this was rapdily nonpublicized since USB 2 was already in planning, for much faster speed and a 25 foot max cable length, eventually shortened to 16 feet.

Well once you got suitable cable, you still had to cut pigtails off of USB cords so you could get the cable ends.

[ Parent | on HN ]