News for hackers. Stuff that matters.
Re:Seagate's Roadmap: The Path to 120 TB Hard Drives by effie on Thursday March 18, 2021 @05:52PM (#26507948)
URE is a read error, not a drive failure. So yes bigger disk increases chance of silent and loud UREs, but with URE rate 1e-15, for RAID1 disks up to 40TB are usable (you can redo the rebuild if it fails, or simply ignore the loss of data in many cases). If we ever get to 100TB drives, their URE rate will probably go down as well. This and low demand will probably make them quite expensive.
Re:Seagate's Roadmap: The Path to 120 TB Hard Drives by throwaway81523 on Thursday March 18, 2021 @07:11PM (#26508534)
Since the drives are full of ECC already, do UREs result from multiple simultaneous errors? Can that be fixed with even more ECC? I.e. if the errors are reasonably independent, you could change 1e-14 URE rate to 1e-18 or whatever you wanted, by just adding more ECC, in principle of size logarithmic in the size of the disk (though you might want to cache it in ram in such a case). That is how tape drives work, I think. The put ECC codes into blocks on the tape, then erasure codes over clusters of blocks, then more erasure codes over clusters of clusters, etc. RAID amounts to doing that over entire disks, after all.
Re:Seagate's Roadmap: The Path to 120 TB Hard Drives by effie on Thursday March 18, 2021 @09:12PM (#26509291)
I think UREs due to problems with medium (magnetic layer) can be eliminated to arbitrarily small rate with more and better ECC. However I think (probably small) part of the total URE rate are randomly occurring errors due to intermittent mechanical and electronic failures, mostly due to random environment influences. Eliminating those would require technology improvement beyond more ECC on the platter. Probably more ECC and higher quality of all components along the whole datapath.

Maybe the above is wrong because UREs are just the unrecoverable medium errors. I can't find the official definition of URE rate.