So theoretically, energy density of a battery tech only needs to hit one-third the efficiency of gasoline to match mileage. So the goal is 14Mj/kg, and a 10x increase would be 2.5Mj/kg -- so still lower, but getting much closer.
Not really. I go 300 miles between fillups and would like to go more. 10x as many visits to the "energy station" is a huge obstacle.
Not to mention that I often go on trips that are longer than 40 miles. Losing 5 minutes to fillups every 3-40 miles is unworkable. And, I often go places where the gas station density is low, so I'm going to have to fill up more often and there are places that I just can't go on a 3-40 mile tank.
As a commute-only vehicle, 30-40 miles can make sense, but few of us can afford significant money for such an "extra" car.
I've not seen flow batteries in existing vehicles. Electric vehicles use NiMH batteries (0.25 MJ/kg), lithium batteries (0.4 to 0.7 MJ/kg) or lead acid (0.14 MJ/kg fork trucks, but they need mass anyway).
Guessing at the numbers MIT is avoiding naming in that press release, they might get to something three times better than the current lithium batteries, but you also have to add in the mass of the pumps, and the reaction part of the battery.
It could "win", but it won't be a game changer.
Putting aside vehicles though, flow batteries have some interesting properties for utility scale energy storage. The rate at which you can store or retrieve energy is independent from the amount of energy you can store. The first is by the size of your reactor, the second is by the volume of your storage tanks. It is possible if they are using common enough elements for their fluid that they could be a good answer for peak load shifting or production storing.
...we estimate that optimized SSFC systems using established lithium intercalation compounds could have energy densities of 300–500 Wh L−1 (specific energy 130–250 Wh kg−1), which would satisfy metrics considered necessary for widespread adoption of all-electric vehicles.[4] Further improvements would be possible by ‘dropping in’ higher-energy-density or lower-cost storage compounds in the SSFC platform as they are developed.
http://onlinelibrary.wiley.com/doi/10.1002/aenm.201100152/fu...
(linked from http://web.mit.edu/newsoffice/2011/flow-batteries-0606.html)
So 0.47-0.90 MJ/kg. Based on theoretical calculations -- they haven't actually engineered this.
The original MIT release claims a 10 fold improvement in energy densities over existing flow batteries, but that is still more than an order of magnitude worse than the incumbent fuel.