Re:SolidRun 1U 2 node Arm Server
by walrus01 on Monday March 01, 2021 @03:22PM
(#26307878)
The part with four 10Gbps ports is nice. I wish there were more mini-itx x86-64 server boards with such. The vast majority of mini-itx boards are not designed for front-to-back server airflow, and are intended/marketed more for consumer enthusiast small gaming PCs and stuff.
Ordinarily in a x86-64 intel or AMD chipset server if you wanted 4 x 10Gbps SFP+, in addition to whatever NICs are on the motherboard, you'll end up using one of the Intel chipset, low-profile PCI-Express interface cards in a slot. Using some 1U long depth Dells as an example you might get a motherboard that has 2 x 1000BaseT and 2 x 10GbE SFP+ in daughtercard plugged into the motherboard, and then you'd have two or three low-profile PCIE slots to add more NICs. Or some combination like one full-height size PCIE slot and one low profile slot.
Ordinarily in a x86-64 intel or AMD chipset server if you wanted 4 x 10Gbps SFP+, in addition to whatever NICs are on the motherboard, you'll end up using one of the Intel chipset, low-profile PCI-Express interface cards in a slot. Using some 1U long depth Dells as an example you might get a motherboard that has 2 x 1000BaseT and 2 x 10GbE SFP+ in daughtercard plugged into the motherboard, and then you'd have two or three low-profile PCIE slots to add more NICs. Or some combination like one full-height size PCIE slot and one low profile slot.