News for hackers. Stuff that matters.
Re:RaSCSI: A virtual SCSI device emulator that runs on a Ras... by nachoo on Wednesday February 24, 2021 @09:03AM (#26249900)
It surprises me how this kind of device could be emulated over Linux (I know it has the baremetal option), I always see RPi too complex to work like a MCU.
Re:RaSCSI: A virtual SCSI device emulator that runs on a Ras... by tyingq on Wednesday February 24, 2021 @11:07AM (#26251421)
I see a 50 pin connector, so I would guess it's limited to SCSI-2, 5MBps/40Mbps. That seems to be right at the top of the range that you can bitbang GPIO reliably on an Rpi3 (50Mhz).

You're right in that the old rule was that bitbanging was limited to low bandwidth stuff in the past. The advent of cheap, high clock speed and small devices like the Rpi, ESP32, STM32Fx, etc, changed the game a lot. You can now bitbang VGA reliably on really cheap MCUs, for example.

Re:RaSCSI: A virtual SCSI device emulator that runs on a Ras... by guenthert on Wednesday February 24, 2021 @02:42PM (#26254624)
??? complex? The interaction with a vanilla Linux kernel doesn't lend itself to real time applications, but if the SCSI protocol uses hand-shake signals like GPIB, then the timing isn't all that critical.

Sure, a Beagle Bone Black/Blue/Green with its PRUs seems like a better fit, but the RPi is undeniably much more popular and a little cheaper.