OpenBSD on the Lenovo ThinkPad X1 Nano

Re:OpenBSD on the Lenovo ThinkPad X1 Nano by cwlb on Thursday January 28, 2021 @05:58PM (#25950746)

for real! some later versions of the X1C have had S3 patched in but when the X1C6 was first released this was a surprise to me. Apparently Windows is moving towards S1-only and that gets reflected in firmwares originally designed for windows computers.

For the uninitiated, without S3 closing the laptop lid will either continue to drain battery pretty damned quickly (S1) OR cause the OS to take much longer to resume completely from disk (S4 aka hibernate). As SSDs get bigger/faster/cheaper in comparison to RAM, S4 will start to seem more equivalent, but to make this sensible on an ultrabook you might want to opt for that 1+TB NVME so you can hibernate on lid-shut without eating a significant fraction of your disk on swap.

[ Parent | on HN ]

Re:OpenBSD on the Lenovo ThinkPad X1 Nano by p_l on Thursday January 28, 2021 @06:15PM (#25950911)

The requirement for certification with S1 aka Modern Standby btw requires that proper S1 implementation draws same or less power than S3, iirc.

But that requires pretty heavy power saving code

[ Parent | on HN ]

Re:OpenBSD on the Lenovo ThinkPad X1 Nano by greggyb on Thursday January 28, 2021 @11:02PM (#25953718)

Note for this laptop, specifically, it maxes out at 16GB RAM, and it's soldered, so that is a hard cap. That'd take a 256GB SSD down to 240GB after swap. I don't think it's a big concern for this machine, though certainly could be for some mobile workstation with much more RAM.

[ Parent | on HN ]

Re:OpenBSD on the Lenovo ThinkPad X1 Nano by maxerickson on Thursday January 28, 2021 @06:40PM (#25951130)

16 GB of RAM seems fine even on a 256 GB disk.

(It's plenty at that point, but hardly seems to be the yes/no on the whole deal)

[ Parent | on HN ]