Indeed the original engineered composite material: Plywood.
Concrete is compressive strength materials (rock, sand) bonded with cement. OTOH - We could say reinforced concrete, (steel, fiberglass, etc reinforcement) is a composite.
https://www.bostonglobe.com/2021/01/25/nation/weekend-riotin...
The Persians (and their allies) used wicker shields that chose light weight over protection [1].
More recently, there was also a video floating around recently of how protesters were building Viking shield walls to protect themselves [2]
0 - https://amzn.to/39n23Jx 1 - https://en.wikipedia.org/wiki/Sparabara 2 - https://twitter.com/joshuapotash/status/1291962889323020288?...
Folks who have done 3D printing figure out pretty quickly that the orientation of the print can have a large effect on the various structural properties of the thing printed. I basically spent the first couple of months printing various test objects in different orientations to get a better understanding of this.
For that reason, the paper gives a reasonable way to approach the question of "how can I make this stronger?".
Neither use the 3D twisting method outlined in the article.
Why doesn't that qualify as biomimicry?
> Their bio-mimicking spiral patterns improved the overall durability of the 3D printed concrete...
That's like, the 4th paragraph in the article published by the university.
> Ansys has an entire package devoted to the analysis of structures made from anisotropic materials in this way.
Also, if you read your link paper, they are not doing anything different that what has been known for a long time in long-fiber composites - see: https://www.liebertpub.com/cms/10.1089/3dp.2020.0172/asset/i...
They are using a new material (concrete) and in-situ fabrication technique (extrusion/printing) that is at an early stage of development and doesn't seem to be performing well. I'm assuming that the type of empirical data produced by these experiments is a prerequisite to developing a finite element model for these materials/techniques.
The worst case here is that civil engineers have to reinvent the knowledge that you believe other engineering disciplines have mastered using different materials. Computer guided in-situ reinforced concrete seems quite novel to me; perhaps that is a reflection of my own knowledge gap.
> originally for aerospace / racing applications
That's a wild take on "very old"!
I bet you can find even older examples, e.g., textiles
Further, rotating layers to change the bulk performance of materials composed of anisotropic plies is very old technology developed originally for aerospace / racing applications.
Ansys has an entire package devoted to the analysis of structures made from anisotropic materials in this way.