Re:An Open-Source FPGA-Optimized Out-of-Order RISC-V Soft Pr...
by NieDzejkob on Tuesday January 05, 2021 @07:44AM
(#25644932)
I believe the closest measurement would be in Table VII on page 8 of the paper: http://www.rsg.ci.i.u-tokyo.ac.jp/members/shioya/pdfs/Mashim...
[ Parent
| on HN ]
Re:An Open-Source FPGA-Optimized Out-of-Order RISC-V Soft Pr...
by childintime on Tuesday January 05, 2021 @09:18AM
(#25645714)
"In comparison to the BOOM, the RSD achieved 2.5-times
higher DMIPS and 1.9-times higher DMIPS/MHz", which should be comparable to ARM cores around 4 years ago.
Re:An Open-Source FPGA-Optimized Out-of-Order RISC-V Soft Pr...
by Veedrac on Tuesday January 05, 2021 @10:16AM
(#25646347)
Note that BOOM is now on v3[1], which claims to be 3.93 DMIPS/MHz, or about twice RSD.
[1] https://people.eecs.berkeley.edu/~krste/papers/SonicBOOM-CAR...
Re:An Open-Source FPGA-Optimized Out-of-Order RISC-V Soft Pr...
by jhallenworld on Tuesday January 05, 2021 @09:56AM
(#25646143)
RV32IM, 2.04 DMIPS/MHz, 95.3 MHz, 15K LUTs, 8K LUT FFs, 6 BRAMs on Zynq 7020.
I'm curious if this will work on Lattice ECP5- I'm not really sure if Synplify supports system verilog to the same degree as the Xilinx tools. ECP5 is interesting because it's a $10 FPGA..
Re:An Open-Source FPGA-Optimized Out-of-Order RISC-V Soft Pr...
by mithro on Tuesday January 05, 2021 @06:31PM
(#25652755)
FWIW Google is working on improving the support for SystemVerilog in open source tools.
On the developer tooling side, there is https://github.com/google/verible for linting, code formatting and code indexing.
On the actual compilation side with there are https://github.com/alainmarcel/Surelog and https://github.com/alainmarcel/UHDM which are then being coupled with open source tools like Yosys to allow targeting Xilinx 7 Series and Lattice ECP5 FPGA ICs with fully open source flows using fully open source FPGA tools like symbiflow.github.io