News for hackers. Stuff that matters.
Re:3D printing boats is becoming standard practice by s1artibartfast on Monday December 21, 2020 @03:52AM (#25493230)
Why? CNC machining provides better quality and is faster. You can CNC a simple mold in minutes with precision that exceeds any 3D printing technology.
Re:3D printing boats is becoming standard practice by lylecheatham on Monday December 21, 2020 @11:35AM (#25496458)
Minutes is a stretch. It will likely take multiple tools and setups to make a mold, and even more if you're starting from a billet that needs facing etc.
Re:3D printing boats is becoming standard practice by s1artibartfast on Monday December 21, 2020 @01:07PM (#25497553)
I agree it is definitely a stretch for a full mold, but was thinking along the lines of an mold pocket insert, like those which can be 3D printed [1].

You could make this from reasonably sized stock with 2 setups. First you rough the shape and cut the mold cavity, then you remove the stock and face the backside. I'm used to an automatic tool changer, which would be needed if you want to go fast

https://www.pressebox.com/pressrelease/apium-additive-techno...

Re:3D printing boats is becoming standard practice by VBprogrammer on Monday December 21, 2020 @05:36AM (#25493673)
One possible reason would be to allow geometry which isn't easily milled. Perhaps cooling jackets, for example, could be incorporated into the mold for example.
Re:3D printing boats is becoming standard practice by avianlyric on Monday December 21, 2020 @06:51AM (#25494056)
Beyond the cooling jackets there isn’t really going to be anything hard to mill. If the geometry is hard to mill, then it’s almost certainly inappropriate for injection moulding (assuming you actually want to extract your injection moulded object from the mould).