Mind you, in this case, we're talking about something that 1. doesn't have to dry clear (and in fact can dry entirely opaque), and where 2. it'd be much better if you could remove it by peeling it up, rather than by using a solvent, because many of the components have plastic housings that don't take kindly to, well, any strong solvent really. The goal isn't an art piece — it's to create a barrier to moisture/corrosion for a board within an unlit box. If you want to do a repair, you'd entirely remove this layer before doing it; and entirely reapply it afterward.
Re:A tale from the trenches fixing an NES
by kelnos on Tuesday October 27, 2020 @12:18AM
(#24904462)
How hard would the peeling be? I'd worry about ripping off components or even board traces if I had to peel something like that off it.
I haven't had any experience with lacquer because traditional lacquers almost have to be sprayed, which I am not equipped to do. I have plenty of experience with shellac because you can brush it and get a pretty decent finish off the brush, or French polish for a more refined finish. French polishing takes advantage of the aforementioned properties of shellac: besides laying another thin layer down, you're also redisolving the existing layers and smoothing them as you go.
Traditional varnishes cure by polymerization, and generally cannot be removed with mineral spirits. That isn't to say you won't ruin the finish trying, but you'll need a different solvent if you want it gone cleanly.
[0] lacquer has become an almost meaningless term. There are products that might or might not technically be lacquer that are called lacquer or water borne lacquer or some other phrase that includes the word. I'm referring to the stuff that uses lacquer thinner for the solvent. You'll know it if you smell it: it smells like it's giving you cancer right now, not in 30 years.