News for hackers. Stuff that matters.
Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by blacksmith_tb on Friday September 04, 2020 @07:33PM (#24379986)
Now retailing for $9.99 USD[1] but unless I specifically needed ethernet, I'd probably pick an RPi Zero W for support's sake.

1: https://www.friendlyarm.com/index.php?route=product/product&...

Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by sneak on Friday September 04, 2020 @11:38PM (#24381244)
How long until it’s embeddable inside an ordinary-looking ethernet cable with no nondestructive detection methods other than x-ray?
Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by CompuHacker on Saturday September 05, 2020 @12:38PM (#24384862)
Should be possible now with a less capable (microcontroller-ish) chip. Delivering power may not be feasible without custom PoE hardware on one end.
Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by Ir0nMan on Saturday September 05, 2020 @03:01AM (#24381841)
Looks like they also have a newer 'NanoPI NEO3' version. It comes with USB-C for power, USB 3.0 (Type A) for data, and 1/2GB RAM options. $20-25 depending on the RAM choice.

https://www.friendlyarm.com/index.php?route=product/product&...

Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by volfied on Friday September 04, 2020 @09:24PM (#24380640)
Is this a good machine for a pihole? Can I power it via usb from my router?
Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by mucinoab on Friday September 04, 2020 @10:27PM (#24380917)
Yes and yes.
Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by ravenide on Friday September 04, 2020 @08:36PM (#24380404)
Stupid question, but without any video support at all, how do you even install the software you need to use it as a headless server?
Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by kens on Friday September 04, 2020 @08:51PM (#24380488)
You install the OS on a TF (Micro SD) card using your desktop computer and then put the card in the ZeroPi. After booting, you can connect through the serial port or ssh via Ethernet or WiFi, depending on what you have set up.

More at http://wiki.friendlyarm.com/wiki/index.php/ZeroPi#Configure_...

Re:$13 ZeroPi is a tiny headless computer with Gigabit Ether... by 10000truths on Friday September 04, 2020 @08:47PM (#24380461)
Insert the SD card into another machine, add a boot and filesystem partition, install OS onto it, mount the filesystem of the SD card, chroot to it, and install sshd.