Yes, I believe this is what Phyphox does for you.
Most people have a microphone in their smartphone. But of course you could use a dedicated microphone and do a frequency analysis yourself instead.
edit: I'm probably wrong
Especially RED drives are marketed for NAS systems (from home to SMB size). When a drives are installed into a closure, things like power and thermal budget comes into play.
NAS boxes are designed with strict limits and if they cannot cool themselves (and the drives) off or cannot supply the required power to drives; data corruption, performance/life span degradation may occur.
In extreme cases (with large storage arrays) calculated overall power budget can skew and may cause blackouts in some parts of the data center. There's a presumed ~2W difference in power consumption between 5.4K and 7.2K drives. We can safely install 60 of them in a 4U enclosure today. If we add 4 enclosures to a rack, that creates a ~480W difference, which is a one HPC server or 2-3 low-load, 1U or 2U servers. This is indeed significant.
While some of these drives are in MyBook enclosures, REDs may end up in very different places and may cause problems. In that case, head or spindle noise is not even the smallest concern.
If we're talking about noise, continuous (spindle) noise is much more degrading than head/seek noise. For me, even benign noises like USB fans have much more noticable effects after the day than mechanical keyboard noise for example.
Is that purely extra friction due to higher speed? Or is it spin up from sleep needing more power?
So, that difference is for sustaining higher spindle speeds.
The peak power requirement is 1.79A (~21.5W) which is probably consumed when starting from full-stop state (stand-by, sleep or power-off where motor is turned off).
[0]: https://media.flixcar.com/f360cdn/Western_Digital-3805661149...
[0]: https://products.wdc.com/library/SpecSheet/ENG/2879-800002.p...
Many EMAZ and EZAZ seems to be affected.
It seems that the iOS app Phyphox can be used to determine if your drive is running at 7200 rpm or 5400 rpm using acoustic analysis.
From the comments:
> "There is an app called phyphox that allows you to access all of your phone's sensors. If you download it and use the Acceleration spectrum feature, you can measure the speed of your drive by simply placing your phone on top of the drive. The application is surprisingly accurate and I use it to check the health of my drives."