News for hackers. Stuff that matters.
Re:CERN at Home: Building a Particle Detector by dilippkumar on Tuesday September 01, 2020 @02:14PM (#24344899)
> The problem seems to be that sound cards (or chips) in modern PCs are too clever for their own good. They are designed to optimise microphone input for Skype and Zoom and that means removing the noise and extraneous clicks that are exactly the signal that the detector puts out.

Ugh! I wonder what other hidden features are lurking on my laptop hardware. I am conflicted because while I understand perfectly well why market forces compel hardware manufacturers to add these "features", I don't like the idea of not being able to trust my primary computing hardware.

Re:CERN at Home: Building a Particle Detector by imglorp on Tuesday September 01, 2020 @02:33PM (#24345137)
A 10-bit ADC chip and a Raspi zero together cost under $10 on Adafruit. You would sidestep the audio card altogether.
Re:CERN at Home: Building a Particle Detector by 0zelot on Tuesday September 01, 2020 @02:43PM (#24345276)
or one of those even cheaper 16bit USB soundcards https://github.com/ozel/DIY_particle_detector/wiki/Soundcard... I believe Steve (who wrote the blog) might have had the wrong cable for his other computer (3-pin vs. 4-pin 3.5 mm jack)
Re:CERN at Home: Building a Particle Detector by analog31 on Tuesday September 01, 2020 @11:33PM (#24349744)
I've used the audio i/o hardware on mainstream notebook computers, and cheap USB audio adapters, for years, to perform audio signal analysis. This includes hardware purchased fairly recently.

The audio subsystems contain the basic DC blocking and anti-aliasing features that you'd expect, but do not seem to add any other processing unless you ask for it (e.g., equalization). At least, nothing that would be noticeable in either steady state or transient analysis.

So far as I know, apps like Skype and Zoom do their own processing.

Re:CERN at Home: Building a Particle Detector by shadowgovt on Tuesday September 01, 2020 @05:45PM (#24347479)
Probably worth remembering that the sound card is generally designed to put out sound (or take in sound) for human perception.

These "features" are features because they better map the physically raw input to the actual desired input for the most common use case. Sound is only sound because of human perception; if the hardware is sensitive to EM interference that the human ear isn't sensitive to, that's noise (literally).