News for hackers. Stuff that matters.
Re:Ventoy: A new bootable USB solution by moonchild on Saturday August 22, 2020 @06:00AM (#24243042)
> Windows setup ISOs

You can't dd them. Format a USB drive, make a fat32 or ntfs[1] partition. Extract all the files from the ISO (mount -o loop to an intermediate directory and copy the files out, 7z can also do it) onto said partition. Set the bootable and ESP (EFI System Partition flag) flags. Works like a charm every time.

(You can also try the woeusb[2] tool, but it's not doing anything fundamentally different to or better than that.)

1. Fat may be problematic; iirc install.wim is >4gb lately. But ntfs-3g is adequate if lacklustre.

2. https://github.com/slacka/WoeUSB

Re:Ventoy: A new bootable USB solution by divingdragon on Saturday August 22, 2020 @11:07AM (#24244612)
> make a [...] ntfs partition

I think it would only work if your UEFI firmware happen to contain a driver for reading NTFS partitions. UEFI firmwares are only required to read FAT12/FAT16/FAT32. Rufus solves this by making an extra FAT partition with a UEFI:NTFS [1] binary which loads its own NTFS driver to boot the Windows `bootmgfw` EFI binary.

[1]: https://github.com/pbatard/uefi-ntfs